Overview
The Crown Automotive 52000599 is a passenger side inner tie rod end with right hand thread. It fits the 1984–1990 Jeep Cherokee (XJ) and the 1987–1990 Jeep Wrangler (YJ), in several trims.
Key features
- Passenger side
- Inner position
- Right hand thread
- Direct fit listing for the XJ and YJ
Choosing the right setup
An inner tie rod end sits closest to the steering box or rack, where the linkage pivots most. Because it works with the outer end and the center link, a worn inner joint can make the steering feel vague even when the outer end is sound. Look at the rubber boot and the joint’s pivot for grease loss and play.
When choosing a replacement, match the side and thread direction first, then confirm the rest of the steering linkage is in good shape. Many owners replace inner and outer ends in the same job to keep the steering geometry even and to avoid repeat alignment visits.
- Inspect the boot for cracks before ordering
- Check the center link and outer ends for play
- Replace joints in matched sets where wear is found
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52000599 |
| UPC | 848399012415 |
| Part type | Tie rod end |
| Position | Inner |
| Side | Passenger |
| Thread | Right hand |
Vehicle fitment
It fits 1984–1990 Jeep Cherokee (XJ) models in Base, Chief, Laredo, Limited, Pioneer and Sport trims, and 1987–1990 Jeep Wrangler (YJ) models in Base, Islander, Laredo, S, Sahara and Sport trims.
The list does not include the 1991–1995 Wrangler YJ or other Cherokee years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The right hand thread has to match the existing tie rod, so check the thread direction before fitting the new end.
What’s included
One inner tie rod end. No other parts are listed.









