Overview
The Crown Automotive J0918257 is a left position steering tie rod end for classic Jeep CJ models. It fits the 1972–1983 CJ5, 1972–1975 CJ6, 1976–1986 CJ7 and 1981–1985 Scrambler vehicles.
The end attaches to the left tie rod tube of the steering linkage. Right hand drive is noted as a fitment detail, so confirm the steering arrangement of your vehicle against the listed models before installing.
Key features
- Left position tie rod end that attaches to the tie rod tube
- Direct fit listing for four classic CJ-era entries
- Right hand drive noted as a fitment detail
- CJ5 entries include Base, Golden Eagle, Laredo, Limited and Renegade trims
Worn CJ steering parts
Classic CJ steering components have usually seen decades of road grit and rust, so the tie rod tube and nearby joints deserve as much attention as the end itself. A worn end often causes the front wheels to wander, a loose steering wheel and uneven tread wear on older tires. Before pulling the old end, check the tube for dents or cracks, since a bent tube can ruin a new end quickly.
Many owners replace the drag link, the pitman arm or the steering box bushings at the same time as the tie rod end, because the whole linkage shares the same wear. A careful look at each joint while the end is off saves a second trip under the vehicle.
- Check the tie rod tube for dents and rust
- Inspect the nearby drag link and pitman arm
- Clean the threads before fitting the new end
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0918257 |
| UPC | 848399054613 |
| Position | Left |
| Placement | Left tie rod on tie rod tube |
| Drive configuration | Right hand drive |
| Fitment type | Direct Fit |
Vehicle fitment
It fits 1972–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), 1972–1975 Jeep CJ6 (Base), 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR). Verify year, model and trim against your vehicle before buying.
Willys CJ models and the Wrangler YJ are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because CJ steering parts are often worn, inspect the tie rod tube and nearby joints while the old end is off. Check that the left side matches your steering.
What’s included
Compare the package contents with your installation plan before starting, including any boot, nut or cotter pin you need.









