Overview
The Crown Automotive steering kit SK3, part number CROSK3, is a left-hand drive (LHD) steering kit for the 1987–1990 Jeep Wrangler YJ. The kit contents are all four tie rod ends and adjusters with their hardware, plus a steering stabilizer.
Key features
- Four tie rod ends, each with an adjuster
- Hardware included with the tie rod ends
- Steering stabilizer included
- Left-hand drive (LHD) configuration
- Direct fit for the 1987–1990 Jeep Wrangler YJ.
Alignment after linkage work
Tie rods set the toe angle of the front wheels, and the steering stabilizer damps side-to-side movement in the linkage. When several linkage parts are replaced together, the wheels can be out of alignment until the adjusters are set and the front end is checked. Setting the adjusters evenly on both sides helps the steering center correctly.
Before starting, inspect the drag link, pitman arm and steering box for play, since replacing only some parts can leave a loose point that affects the new components. Keep track of the adjuster positions as you go, and tighten the fasteners to the correct specification for the vehicle once everything is in place.
- Set both sides to the same starting length before alignment
- Check the drag link and pitman arm for play
- Recheck toe after the first few drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CROSK3 |
| Kit contents | 4 tie rod ends and adjusters with hardware; steering stabilizer |
| Drive configuration | Left-hand drive (LHD) |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list shows this kit for the 1987–1990 Jeep Wrangler (YJ) in Base, Islander, Laredo, S, Sahara and Sport trims.
Not covered: later YJ years, TJ models and other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Steering linkage work usually calls for a front-end alignment afterward. Set the tie rod adjusters before the alignment is performed.
What’s included
The kit is four tie rod ends and adjusters with hardware, plus a steering stabilizer.









