Overview
The Crown Automotive 52040305 is a rear shock mount bracket meant to be welded to the frame. It carries a direct fit label but names no vehicle, year or model.
Because the bracket attaches by welding, the mounting location on your frame determines whether it lines up with your shock. Confirm that location against your vehicle before welding.
Key features
- Rear shock mount bracket
- Designed to be welded to the frame
- Labeled direct fit
- Crown Automotive part number 52040305
Before you weld
Welding a shock mount bracket to a frame is a permanent step, so measure carefully before striking an arc. Shock geometry depends on the distance between the upper and lower mounts, the travel the shock needs and the angle it sits at when the suspension is at rest. Test-fit the shock with the vehicle at ride height and again at full extension and full compression before committing to a weld position.
Clean paint, rust and coatings from the weld area, and check that the bracket clears the tire, brake lines, fuel lines and exhaust. A weld that fails under load can damage the frame, so a qualified welder should inspect the joint before the vehicle goes back on the trail. Recheck the shock mounts after the first few runs off road.
- Test-fit the shock at ride height and at full travel
- Clear brake and fuel lines before welding
- Inspect welds after the first trail outings
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52040305 |
| UPC | 848399015010 |
| Part type | Shock mount bracket |
| Position | Rear |
| Attachment | Welded to frame |
Vehicle fitment
This bracket is a rear shock mount that is welded in place, so its fit depends on where it sits on your frame. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket is welded to the frame rather than bolted, so welding and placement need a qualified welder. Plan the shock location before welding.
What’s included
One rear shock mount bracket.
Not included: The shock absorber and any welding materials.









