Overview
The Fabtech FTS53002 is a dual shock bracket for the front suspension of 2009–2010 Dodge Ram 2500 and Ram 3500 trucks. It is a bracket only and is listed without shock absorbers, so the shocks are a separate item.
The bracket is 1.5 in. OD tubular, bolts on with no welding, and is designed to increase dampening capacity. The install time is 4 hours.
Key features
- Bolt-on installation with no welding
- 1.5 in. OD tubular construction
- Front location
- Increases dampening capacity.
- Listed without shock absorbers
Shock pairing and setup
A dual shock bracket works as the anchor for the shocks, so shock selection matters as much as the bracket itself. Look for shock eye and stud styles that line up with the bracket holes, and confirm the shock stroke clears the frame, springs and steering components through full travel. Gas-charged shocks are a common choice for heavier Ram trucks, but the right pick depends on load and driving.
Before tightening anything, dry-fit the bracket and shock, and check that the mount sits square and the bolts seat cleanly. Inspect bushings and dust boots before installing. After the first few drives, recheck fasteners, look for bent tubing near the welds, and watch for leaks at the shock body.
- Dry-fit the bracket and shock before final torque
- Inspect bushings and dust boots first
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS53002 |
| UPC | 674866029071 |
| Location | Front |
| Fitment type | Direct fit |
| Type | Without shocks |
| Tube size | 1.5 in. OD tubular |
| Install time | 4 hours |
Vehicle fitment
It fits 2009–2010 Dodge Ram 2500 trucks in Laramie, Power Wagon, SLT, ST, SXT and TRX trims, and 2009–2010 Dodge Ram 3500 trucks in Laramie, SLT, ST and SXT trims.
Dodge Ram 1500 models and model years outside 2009–2010 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The installation is bolt-on with no welding. Because shocks are a separate purchase, confirm their mounting points match this bracket before installing.
What’s included
The product is the dual shock bracket for the front position.
Not included: shock absorbers.









