Overview
The Trail Gear 110046-1-KIT is a lower shock mount kit that welds directly to a front or rear axle housing. It is sold as a pair of universal application mounts made from 3/16 in. steel.
Each mount is 2.5 in. tall with 1/2 in. shock mount holes. The curved bottoms let the mounts sit horizontally or vertically on the axle tube, so you can pick the orientation that clears your setup.
Key features
- Welds directly to the axle housing
- Suitable for front or rear axle applications
- Curved bottoms allow horizontal or vertical mounting
- 3/16 in. plate steel construction
Welding axle shock mounts
A lower shock mount transfers shock load into the axle housing, so the weld area carries the force each time the shock compresses. Clean the housing thoroughly at the weld spots, removing paint, rust and oil, and fit the mounts before final welding to check clearance.
Tube diameter and wall thickness vary, so test-fit the curved bottoms against the housing before tacking. Choose vertical mounting when the shock needs to be closer to the axle centerline and horizontal when clearance to the tire is tight. Keep the shock eye aligned with the mount to avoid side loads on the bushing.
Check the welds after the first trail outings and look for cracking at the toes of the fillet. Mount hardware and shock bushings also wear, so replace them when the shock is serviced.
- Clean paint, rust and oil from weld areas
- Test-fit mounts before final welding
- Inspect weld toes after rough trail use
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110046-1-KIT |
| UPC | 70000621423 |
| Quantity | Pair |
| Material | 3/16 in. plate steel |
| Height | 2.5 in. |
| Shock mount hole | 1/2 in. |
| Mounting | Welds directly to axle housing |
Vehicle fitment
They suit front or rear axle housings. Confirm the axle housing and shock size match your build before welding.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These mounts are welded to the axle housing, so placement and weld quality determine how well they hold. Have the welds made by a qualified welder, and confirm the mounting orientation before welding.
What’s included
A pair of shock mounts.
Not included: Shock absorbers. No bolts or other hardware are described.









