Overview
The Crown Automotive J0912703 is a shock absorber mounting stud for the driver or passenger side, at either the front or rear position.
Crown Automotive sells replacement parts for Jeep vehicles across more than 8,000 part numbers. A catalog of that size does not by itself confirm fit for any one Jeep.
Key features
- Shock absorber mounting stud
- Driver or passenger side.
- Front or rear position.
- Crown Automotive part number J0912703
Choosing the right stud position
A shock mounting stud is a threaded post that anchors the shock to a bracket or axle, and the shock’s eye or post-style end must line up with it. Before buying, measure the mount on your vehicle and note which side and position it occupies. Studs that are slightly off in length or thread can cause the shock to bind at full extension or compression.
After installation, check that the nut is torqued to the specification in your vehicle’s service manual and that the stud does not turn under load. Look for corrosion, cracked welds or elongated mounting holes at each service interval, since a loose stud can allow the shock to move unpredictably. Replacing the shock bushings during the same job keeps the new stud and shock working together.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0912703 |
| UPC | 848399054484 |
| Part type | Shock absorber mounting stud |
| Position | Driver or passenger side, front or rear |
Vehicle fitment
It is a universal fit stud, so no year, model or chassis is tied to it. Compare the stud’s side and position with your existing mount before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Count the studs supplied against the number your mount needs before fitting.
