Overview
The Rubicon Express RE2000 is a shock adapter bracket kit that converts a bayonet style shock mount to a loop style eyelet. It is a direct fit for mounting many brands of shocks to YJ, XJ, TJ and ZJ Jeeps.
The bracket is required on long travel shocks. The kit includes the sleeve and bolt the conversion needs, and the sleeve is 1/2-inch ID by 5/8-inch OD by 1.4 inches long.
Key features
- Changes factory stud design to an eyelet
- Required on long travel shocks
- Sleeve bolt 1/2-inch by 2-3/4-inch
- Sleeve 1/2-inch ID, 5/8-inch OD, 1.4 inches long
- Hardware included
Eyelet conversion and shock length
Converting a bayonet mount to a loop eyelet changes the way the shock attaches, so the eye, sleeve, and bolt all have to work together. The sleeve sits inside the eye and carries the load through the bolt, so a snug fit matters more than tightening force. A shock that is too long or too short for the mount can bind near full extension or compression.
Long travel shocks put more stress on the mounting hardware, so check the bolt and sleeve for wear during regular service. Look for cracks in the eyelet, play in the sleeve, or bushings that have gone soft. Replacing worn bushings and hardware together keeps the mount in line with the shock’s intended travel.
- Measure shock eye size before ordering
- Confirm the sleeve seats fully in the eye
- Inspect hardware after rough trail use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2000 |
| UPC | 614901439922 |
| Type | Shock adapter bracket with hardware |
| Mount change | Bayonet to loop eyelet |
| Sleeve bolt | 1/2 inch by 2-3/4 inches |
| Sleeve | 1/2-inch ID, 5/8-inch OD, 1.4 inches long |
| Fitment | Direct fit |
Vehicle fitment
The bracket kit is for mounting many brands of shocks to the YJ, XJ, TJ and ZJ Jeeps, covering the 1987 to 1995 Wrangler (YJ), 1984 to 2001 Cherokee (XJ), 1997 to 2006 Wrangler (TJ) and 1993 to 1998 Grand Cherokee (ZJ).
Confirm your vehicle’s year, model and trim before ordering, and check the shock’s eye size against the eyelet.
Installation notes
The sleeve and bolt come with the kit, so no separate hardware is needed for the conversion.




