Overview
The Crown Automotive Rear Lower Control Arm, part number 52128866AA, is a rear lower suspension control arm with bushings. It fits the 2004-2007 Jeep Liberty (KJ).
Crown Automotive has been making replacement parts for Jeep vehicles for over 50 years, with over 8,000 part numbers. This arm fits the rear lower position and includes bushings.
Key features
- Rear lower control arm
- Bushings included
- Direct fit replacement for the listed Jeep Liberty trims
- Crown Automotive part number CRO52128866AA
Control arm wear and bushings
A control arm links the axle or wheel carrier to the frame and holds the wheel in its proper position as the suspension moves. Its bushings absorb movement and wear over time, so worn bushings can let the arm shift under load. Symptoms include a clunk over bumps, wandering or pulling on the road, and uneven tire wear, all of which can change the alignment and the way the vehicle tracks.
Off-road use puts extra stress on arms and bushings, so inspect the rubber for cracks, splits and oil contamination whenever the arm is out. Check the bushing sleeves for movement and make sure the arm is not bent. Replacing a worn arm is a good time to inspect the joints and mounts around it, since wear tends to spread across the suspension.
- Clunk over bumps
- Wandering or pulling on the road
- Cracked or split bushing rubber
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO52128866AA (52128866AA) |
| UPC | 848399040883 |
| Product type | Rear lower control arm |
| Position | Rear lower |
| Bushings | Included |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the 52128866AA covers: 2004–2007 Jeep Liberty (KJ) (65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport).
It fits 2004–2007 Jeep Liberty (KJ) models in the 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport trims. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and brake parts are safety-critical, so professional installation is recommended. Support the vehicle on rated jack stands, never on a jack alone. Follow your vehicle’s service procedure and tighten all fasteners to the specified torque. Re-check fasteners after the first miles of driving and again after off-road use. Have the alignment checked after any suspension or steering work, and check that brake lines, hoses and wiring have full clearance through suspension travel.
Control arms position the axle and carry suspension loads, so check the old arm and the new one side by side before installation to confirm the length and bushing positions match. Tighten the arm bolts with the vehicle’s weight on the suspension so the bushings are not pre-loaded in a twisted position. Inspect the other control arms and bushings at the same time, and replace worn mates where needed. Clean the mounting areas first.
What’s included
One rear lower control arm with bushings.
Not included: Check the package contents against your installation before starting, including the bolts and nuts you will need.









