Select your vehicle

Crown Automotive Rear Driverside Brake Adjuster – 4713357

Crown Automotive

$12.96In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 9:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear driver side (rear left) brake adjuster, threaded
  • Fits 1990–2001 Cherokee (XJ), 1993–1996 Grand Cherokee (ZJ), 2002 Liberty (KJ) and 1990–1995 Wrangler (YJ)
  • Part number CRO4713357

Description

Overview

The Crown Automotive 4713357 is a rear driver side brake adjuster, part number CRO4713357, with a threaded adjuster for the rear left position. It fits the 1990–2001 Jeep Cherokee (XJ), 1993–1996 Jeep Grand Cherokee (ZJ), 2002 Jeep Liberty (KJ) and 1990–1995 Jeep Wrangler (YJ).

Threaded brake adjusters set brake clearance. Confirm the rear brake type on your vehicle before installing this part.

Key features

  • Driver side, rear left position
  • Threaded adjuster design
  • Part number CRO4713357
  • Fits XJ, ZJ, KJ and YJ Jeep models

Adjuster care and setup

A rear drum brake adjuster takes up the clearance that builds as the shoes wear, so the pedal stays firm and the shoes sit at the right distance from the drum. A threaded adjuster is turned to move the shoe, which means the threads need to turn freely. Dirt, rust and dried grease can make them stiff, and a seized adjuster can leave one rear wheel dragging, cause uneven shoe wear or pull the vehicle to one side under braking.

When rear brakes are opened up, check that the adjuster turns smoothly and that its threads are not rounded or corroded. Clean the threads and apply a light coat of suitable grease where the design allows, keeping grease off the shoe linings. Set the shoes to the drum after any brake work, then recheck the pedal feel on a short drive before heavy use.

Specifications

Brand Crown Automotive
Part number CRO4713357
Position Rear left (driver side)
Adjuster type Threaded

Vehicle fitment

The manufacturer fitment list shows these vehicles:

  • 1990–2001 Jeep Cherokee (XJ): Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE, Sport
  • 1993–1996 Jeep Grand Cherokee (ZJ): Base, Laredo, Limited, Orvis, SE
  • 2002 Jeep Liberty (KJ): Limited, Renegade, Sport
  • 1990–1995 Jeep Wrangler (YJ): Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara

Grand Cherokee model years outside 1993–1996 and Liberty years other than 2002 are not on this list. Wrangler (TJ) and later Wrangler models are also absent. Confirm your vehicle’s year, model and trim before ordering.

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1990–2001Base, Briarwood, Classic, Country, Laredo, Limited, Pioneer, SE, Sport
Jeep Grand Cherokee (ZJ)1993–1996Base, Laredo, Limited, Orvis, SE
Jeep Liberty (KJ)2002Limited, Renegade, Sport
Jeep Wrangler (YJ)1990–1995Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which side of the vehicle does the Crown CRO4713357 brake adjuster fit?

It is the driver side rear adjuster for the rear left position. The passenger side is a different position, so compare the position of your old adjuster before ordering.

Does this adjuster fit a 2005 Jeep Liberty?

The list does not include a 2005 Liberty. The only listed Liberty year is 2002 in the KJ generation, with Limited, Renegade and Sport trims. Confirm your vehicle's year, model and trim before ordering.

Is the adjuster threaded?

Yes. It is a threaded adjuster. Before installation, compare the thread size and length with your existing adjuster to confirm they match, and check that the threads engage the same way.

How can I tell if a rear brake adjuster is worn or stuck?

Replace it when the threads turn stiffly, slip or feel rough, or when the adjuster will no longer hold its setting after brake work. A rear wheel that drags, runs hot or pulls the vehicle to one side can also point to a stuck adjuster. Inspect it whenever the rear brake shoes are removed.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon