Overview
The Crown Automotive 4167963 is a selector shaft O-ring for NP231 and 242 transfer cases on Jeep vehicles. It is a direct fit for Jeep Cherokee, Grand Cherokee and Wrangler models from 1987 to 2006.
The product is an O-ring for the selector shaft, so match the transfer case type before ordering.
Key features
- Replacement selector shaft O-ring, part number 4167963
- Fits NP231 and 242 transfer cases
- Direct fit for XJ, WJ, WK, ZJ, LJ, TJ and YJ Jeep models
- Model years from 1987 to 2006 across the listed generations
Selector shaft seal care
The selector shaft passes through the transfer case housing and carries the shift lever motion to the internal shift mechanism. The O-ring sits between the shaft and the bore, keeping lubricant inside the case. As the rubber ages it hardens, loses its grip, and lets fluid travel along the shaft.
When replacing it, remove the shaft carefully and check the bore for scoring. Wipe the shaft clean, lightly coat the new O-ring with fresh lubricant, and seat it fully in its groove before reinstalling. Avoid overtightening the shifter fasteners, since that can distort the housing and cause a new seal to leak.
- Look for fluid around the shifter shaft
- Check the groove for burrs before fitting
- Recheck the shifter after a short test drive
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4167963 |
| UPC | 848399003093 |
| Part type | Selector shaft O-ring |
| Transfer case application | NP231 and 242 |
Vehicle fitment
The O-ring fits these Jeep models:
- 1987–2001 Jeep Cherokee (XJ) (Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport)
- 1999–2005 Jeep Grand Cherokee (WJ) (Laredo, Limited, Overland, Special Edition, Sport)
- 2006 Jeep Grand Cherokee (WK) (65th Anniversary Edition, Laredo, Limited, Overland, SRT8)
- 1993–1998 Jeep Grand Cherokee (ZJ) (5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi)
- 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon)
- 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
- 1987–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport)
Wrangler JK and JL models and other Jeep models outside this list are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The product is the selector shaft O-ring, part number 4167963. No other included items are stated.
Not included: A transfer case is not included.












