Overview
The Crown Automotive 5105309AB is a rear differential isolator bushing for all-wheel drive vehicles. It is a direct fit in the rear position for the 2007-2017 Jeep Compass and the 2007-2017 Jeep Patriot. An isolator bushing sits between the differential and the vehicle body or subframe, where it cushions the driveline from the differential’s vibration and movement.
This bushing is for the rear differential only and is made for all-wheel drive vehicles. It is part of Crown’s Jeep replacement range, sold under part number 5105309AB.
Key features
- Rear differential isolator bushing
- Made for all-wheel drive vehicles
- Direct fit for the listed Compass and Patriot models
- Part number 5105309AB
Signs the bushing is worn
An isolator bushing is a rubber or elastomer mount that absorbs movement between the differential and the body. As it ages, the rubber can crack, harden or pull away from its metal sleeve, and the differential may start to shift under load. Owners often notice a clunk when shifting between drive and reverse, a vibration that changes with speed, or a rear end that seems to move more than it should.
Inspection is best done with the vehicle raised and supported safely. Look for splits in the rubber, gaps around the sleeve and fasteners that have loosened. Because the bushing carries the differential’s load, replace fasteners that have stretched or corroded, and check the mounting area for cracks before fitting the new part.
- Cracked or hardened rubber
- Movement or clunks when shifting
- Loose or corroded mounting bolts
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5105309AB |
| UPC | 848399035636 |
| Position | Rear |
| Drive | All-wheel drive |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007-2017 Jeep Compass in 75th Anniversary, Base, Latitude, Limited and Sport versions. It also fits the 2007-2017 Jeep Patriot in 75th Anniversary, Latitude, Latitude X, Limited and Sport versions.
Other Jeep models, including the Wrangler, Cherokee and Grand Cherokee, are not among the fitted models. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Inspect the rear differential mounting area before removing the old bushing, since the bushing carries the differential’s load. Confirm the bushing matches the all-wheel drive setup on your vehicle before it is fitted.
What’s included
One rear differential isolator bushing.








