Overview
The Crown Automotive J0937884 is a 16 inch rubber rear brake hose that runs from the frame to the axle on early Jeep CJ and Willys models with 9 inch or 10 inch drum brakes.
Key features
- 16 inch long hose
- Frame to axle
- For 9 inch and 10 inch drum brakes
- Rubber
- Direct-fit replacement
Rubber hose care
A rubber brake hose flexes with suspension travel and carries pressure from a steel line to the wheel side of the axle. Over time the rubber can swell, crack on the outer cover or harden, and any of these can restrict flow or leak at the crimped ends. Hoses on older vehicles often sit exposed to road salt, mud and heat from the drums.
Keep the hose routed so it has slack through the full range of axle movement and never rubs against the frame or a drum. Use only the fittings that match the hose, and bleed the rear brakes after any change. Checking the hose at each brake service is a simple habit that catches problems early.
- Look for cracks, bulges or soft spots
- Check for seepage around both fittings
- Confirm the hose has slack through axle travel
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0937884 |
| UPC | 848399055429 |
| Position | Rear |
| Type | Rubber |
| Hose length | 16 inch |
| Route | Frame to axle |
| Brake size | 9 inch and 10 inch drum brakes |
| Length class | Stock |
| Fit | Direct fit |
Vehicle fitment
It fits the 1959-1966 Jeep CJ3, CJ5 and CJ6, the 1966 CJ5A and CJ6A, the 1946-1949 Willys CJ-2, the 1949-1958 Willys CJ-3, the 1955-1958 Willys CJ-5, the 1956-1958 Willys CJ-6 and the 1941-1942 Willys MB.
CJ5 and CJ6 models after 1966 are not covered, and the hose is made for drum brakes. Confirm your vehicle’s year, model and trim before ordering.









