Overview
The Crown Automotive input bearing retainer seal, part number 4167929, is a replacement seal for the input bearing retainer on NP231 and NP242 transfer cases. It fits the 1993–1998 Jeep Grand Cherokee ZJ, 1997–2001 Cherokee XJ and Wrangler TJ, and 1999–2001 Grand Cherokee WJ.
It is a direct fit seal. Confirm the outside diameter and lip design against your old seal before installing it.
Key features
- Replacement input bearing retainer seal, part 4167929
- Named for NP231 and NP242 transfer case use
- Direct-fit description from Crown Automotive
- Fits four Jeep models from 1993 to 2001
Replacing the retainer seal
The input bearing retainer seal keeps lubricant inside the bearing area, so a leak here often shows up as oily residue on the case exterior or on the surrounding parts. A hardened seal lip, a nicked sealing surface or a worn bearing that lets the shaft wobble are common causes. Drain the fluid before removing the seal, and clean the mating surface thoroughly so the new seal seats properly.
Take care not to scratch the bore when the old seal is pried out, because a damaged bore will leak even with a new seal. Install the seal with a driver that keeps it square, and check the bearing for roughness or play. Replacing a worn gasket at the same time is a sensible step, and the transfer case should be refilled to the correct fluid level before the vehicle is driven.
- Drain and clean before removing the seal
- Inspect the bearing bore for scoring
- Install with a driver that keeps the seal square
- Refill to the correct fluid level
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4167929 |
| Part type | Input bearing retainer seal |
| Transfer case | NP231 and NP242 |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1997–2001 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims; 1999–2001 Jeep Grand Cherokee (WJ) in Laredo and Limited trims; 1993–1998 Jeep Grand Cherokee (ZJ) in 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims; and 1997–2001 Jeep Wrangler (TJ) in SE, Sahara and Sport trims.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for 1987–1996 Cherokee XJ, 1987–1995 Wrangler YJ and Grand Cherokee WK models.
Installation notes
Replacing this seal means opening the input bearing area of the transfer case, so a qualified shop should handle the work and check for leaks after reassembly.
What’s included
Check the package contents against your installation before starting, including any gaskets or hardware you may need.










