Overview
The Crown Automotive manual transmission roller bearing, part number CROJ0912345, is a replacement roller bearing for Dana 300 transfer cases. It fits Willys CJ-3, CJ-5 and CJ-6 models, Jeep CJ3 through CJ7, Cherokee SJ, Wagoneer SJ, Gladiator, Commando and J-series trucks, from 1955 to 1984.
It is a direct fit replacement. The countershaft roller bearing requires 88 and the input shaft roller bearing requires 22. Match these figures to your transfer case parts diagram before fitting the bearings.
Key features
- Manual transmission roller bearing for Dana 300 cases
- Countershaft requires 88 and input shaft requires 22
- Direct-fit description from Crown Automotive
- Covers Willys and early Jeep CJ, SJ and J-series models
Countershaft and input shaft basics
The countershaft and input shaft each run on roller bearings that carry gear loads at speed, so their condition affects how the whole gearbox feels. Wear often appears as a whine that changes with road speed, a notchy rotation when the shaft is turned by hand, or fine metal particles collecting in the lubricant. Because the two bearings sit in different positions, each should be checked on its own.
During a rebuild, clean the shaft journals and bearing bores, and look for scoring, flat spots or heat marks. Replace bearings that show roughness or looseness, and keep the lubricant clean during assembly. A straightforward reassembly with careful alignment helps the bearings last, and matching the parts to the transfer case is the step that is easiest to overlook.
- Whine that changes with road speed
- Notchy rotation when turned by hand
- Metal particles in the lubricant
- Heat marks or scoring on shaft journals
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CROJ0912345 |
| Part type | Manual transmission roller bearing |
| Transfer case | Dana Model 300 |
| Countershaft roller bearing | Requires 88 |
| Input shaft roller bearing | Requires 22 |
| Fitment type | Direct fit |
Vehicle fitment
It fits Willys CJ-3, CJ-5 and CJ-6 (1955–1958), Jeep CJ3 (1959), CJ5 (1959–1960 and 1966–1979), CJ6 (1959–1960 and 1966–1974), CJ7 (1976–1979), Gladiator and Commando (1966–1967), J-series trucks (1966–1973), Cherokee SJ (1974–1979, 1981–1983 and the 1983 Wide Track Chief), Wagoneer SJ (1966–1967, 1971–1979 and 1981–1983) and Grand Wagoneer SJ (1984).
Jeep XJ, YJ, TJ and ZJ models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 88 and 22 values against your transfer case parts diagram before fitting the countershaft and input shaft bearings.
What’s included
The title identifies a manual transmission roller bearing. Check the package contents against your installation before starting.









