Overview
The Crown Automotive J5360955 is a bearing cup for the Model 20 transfer case, listed under part number CROJ5360955. A bearing cup is the outer race that a tapered roller bearing rolls against, and it is normally pressed into the housing.
It fits the Jeep CJ5, CJ7 and Scrambler in the years shown below.
Key features
- Model 20 transfer case bearing cup
- Listed under part number CROJ5360955
- Fits CJ5, CJ7 and Scrambler models
- Direct fit
Pressing and seating the cup
The outer race of a tapered roller bearing is pressed into the housing bore, so the fit between cup and housing needs care. Clean the bore, look for scoring or raised metal, and make sure the cup starts straight. Tap or press evenly around the cup so it seats square with no gap at any point, since a cocked cup can load the rollers unevenly and shorten bearing life.
The cup and its matching cone are a pair, and the cone should be inspected before assembly. Check the rollers and cage for pitting or heat marks, and replace worn parts together. Setting bearing preload or shim thickness depends on the transfer case design, so follow a qualified technician’s guidance for those steps.
- Clean and inspect the bore
- Use a driver that contacts the outer edge of the cup
- Check that the cup seats square with no gap
- Replace worn cones along with the cup
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CROJ5360955 |
| Transfer case | Model 20 |
| Part type | Bearing cup |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade), and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
The list does not include Wrangler models or CJ5 and CJ7 years outside the listed ranges. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bearing cups are normally pressed into the housing, so a press or a properly sized driver is needed, and the cup should seat square. Confirm the matching cone or bearing before assembly.
What’s included
Check the package contents against your installation before starting, including whether a matching cone is needed. Not included: the transfer case housing and any matching bearing.









