Overview
The Pro Comp 4-inch front leaf spring for the left side, part number 31211L, is a multi-leaf spring rated for a 4-inch lift. It is sold each and includes polyurethane bushings.
The spring uses diamond cut leaves. The diamond cut multi-leaf design with urethane bushings adds clearance and improves ride quality. It is a single spring for the front left corner.
Key features
- Diamond cut multi-leaf construction
- 4-inch lift rating
- Front left position
- Polyurethane bushings included
Replacing a leaf spring pair
A leaf spring carries the weight of the front axle and sets the height of that corner of the truck. Over time the leaves can sag, the bushings can wear and the eye ends can loosen, which changes ride height and steering feel. Inspect the old spring for cracked or broken leaves, worn bushings and sagging compared with the other side.
Because this spring is sold each, the opposite front corner is often replaced at the same time. Matching springs keep the truck level and help both sides respond the same way on uneven ground. Stacked leaves flex together, so a mismatched pair can pull the truck toward the weaker side.
- Check U-bolts and spring hangers for wear before installing
- Torque fasteners to the value in your service manual
- Re-check fasteners after the first few trail runs
- Grease bushing sleeves during installation if your steps call for it
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 31211L |
| UPC | 614901140194 |
| Position | Front left |
| Lift height | 4 inches |
| Spring quantity | Single spring |
| Bushings | Polyurethane, included |
| Sold as | Each |
| Fitment | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and front axle before fitting this spring.
A front set needs a right side spring as well, since this spring is sold each. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front left leaf spring with polyurethane bushings.
Not included: The right front leaf spring.








