Overview
It is a stock-length, non-CV front drive shaft for Jeep Wrangler (TJ) models with a 4.0L six-cylinder engine and a manual transmission. It fits the 1997–2002 Jeep Wrangler (TJ), including the Sahara, Sport and X trims.
The collapsed length is 39.49, the shaft is not a CV design, and no slip yoke eliminator is needed. It is a direct-fit front driveshaft.
Key features
- Front driveshaft at stock length
- Non-CV design
- No slip yoke eliminator required
- Direct fit to the listed Wrangler TJ
Driveshaft angles and wear
A front driveshaft transfers power from the transfer case to the front axle while the suspension moves up and down. A non-CV joint works well at moderate angles, but larger angles on a lifted or articulating vehicle can cause vibration. Keep the shaft’s working angle in mind when comparing the stock length with any suspension changes already on the vehicle.
Wear in a driveshaft often shows up as vibration at speed, a clunk when shifting between drive and reverse, or grease leaking from a joint. Inspect the yokes and universal joints for play, and check that the shaft is straight. Because the front shaft works with the transfer case and axle, a problem in one of those parts can feel like shaft trouble.
- Look for vibration that increases with road speed
- Check for grease leaking from the joints
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52098377 |
| UPC | 848399016147 |
| Length | Stock |
| Collapsed length | 39.49 |
| Joint type | Non-CV |
| Position | Front |
| Engine | 4.0L six-cylinder |
| Transmission | Manual |
| Slip yoke eliminator | Not required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2002 Jeep Wrangler (TJ) Sahara, Sport and X.
The list does not include the Wrangler YJ or the TJ after 2002, and it does not include the Cherokee or Grand Cherokee. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front drive shaft. Check the package contents against your installation before starting.
