Overview
The Crown Automotive 68184808AC is a rubber front brake hose for the passenger side of the 2011–2016 Jeep Wrangler (JK). It is 13 inches long and installs at the front right position.
Key features
- Front right (passenger side) position
- 13 inch front hose
- Rubber
- Stock length
- Direct-fit replacement
Brake hose inspection
A flexible brake hose connects the steel brake line to the caliper and allows the wheel to move with the suspension and steering. Because the hose flexes with every movement, it ages through heat, road grime and small cracks that develop over time. A failing hose may bulge under pressure, weep fluid at the fittings or crack along the outer cover. Any of these signs means the hose should be replaced.
When replacing a hose, route it so it does not rub against the tire, suspension arms or frame, and keep a gentle curve without tension. Replace sealing washers at banjo fittings where they apply, and bleed the brake system once the new hose is installed. Keep brake fluid sealed during the job, since it absorbs moisture when exposed to air.
- Look for cracks along the outer cover
- Check for bulges when the brake pedal is pressed
- Inspect the fittings for seepage
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 68184808AC |
| UPC | 849603016991 |
| Position | Front right (passenger side) |
| Type | Rubber |
| Hose length | 13 inches |
| Length class | Stock |
| Size | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It fits the 2011–2016 Jeep Wrangler (JK).
The 2007–2010 JK uses a different hose, and the 2017–2018 JK years are not on this list. Confirm your vehicle’s year, model and trim before ordering.








