Overview
The Crown Automotive 52060044AE is a rubber front brake hose for the passenger side of the 2007–2010 Jeep Wrangler (JK), in 2-door and 4-door models. It is listed at the front right position.
Key features
- Front right (passenger side) position
- For 2-door and 4-door models
- Rubber hose
- Stock length
- Direct-fit replacement
Front brake hose service
A front brake hose has more movement than most hoses on the vehicle because it bends with the steering knuckle and the wheel as the suspension travels up and down. On a Wrangler, the hose sits close to the tire and the inner fender, so routing it without contact matters. Check that the hose does not touch the tire, the caliper bracket or the fender edge at full lock in both directions.
When replacing the hose, use a new sealing washer at each fitting that uses one and keep the brake fluid level in mind so the reservoir does not run dry while the line is open. Bleed the brakes to remove air and confirm the pedal feels firm before driving. Re-check the hose after the first few drives, since a fresh hose can settle and shift in its bracket.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52060044AE |
| UPC | 848399038637 |
| Position | Front right (passenger side) |
| Type | Rubber |
| Length | Stock |
| Size | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
It fits the 2007–2010 Jeep Wrangler (JK), both 2-door and 4-door. The matching driver side hose is Crown part number 52060045AE.
JK years from 2011 are not covered by this hose. Check your year, model and trim against the vehicle before ordering.








