Overview
The Crown Automotive J8126613 is a 1310 series U-joint kit for driveshafts in older Jeep vehicles. It is a direct fit for the 1984–1993 Jeep Cherokee (XJ), the 1981–1983 CJ5, the 1981–1986 CJ7, the 1986–1992 Jeep Comanche and the 1987–1993 Jeep Wrangler (YJ), along with several Grand Wagoneer, Wagoneer, Scrambler and J-series trucks.
The position is center. Check it against the driveshaft you are repairing before ordering.
Key features
- 1310 series U-joint kit
- Lubeable, so the joints can be greased
- Direct fit to the listed models
- Fits 1981 to 1993 model years across several Jeep trucks and SUVs
Greasing and rebuilding U-joints
Lubeable joints have grease fittings, which let you purge old grease and push in fresh lubricant during regular service. Regular greasing keeps the bearing caps sealed against grit, and it is the main way to extend the life of a joint that works under steady angle on an older Jeep. Use a grease that suits your driveline and avoid overfilling the caps, which can push out the seals.
A rebuild replaces the caps and the cross, but the yokes should be checked for wear first. A joint that has run dry tends to show notching or heat marks on the cross, and the bearing races may be pitted. On a center driveshaft, matching the phasing at both ends matters as much as the joint itself.
- Grease the joints during every service interval
- Check yokes and slip joints for wear before rebuilding
- Match the position to the driveshaft before ordering
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8126613 |
| UPC | 848399068474 |
| U-joint series | 1310 |
| Position | Center. Confirm it against the driveshaft you are repairing. |
| Lubeable | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–1993 Jeep Cherokee (XJ), the 1981–1983 Jeep CJ5, the 1981–1986 Jeep CJ7, the 1986–1992 Jeep Comanche, the 1993 Jeep Grand Cherokee (ZJ), the 1984–1991 Jeep Grand Wagoneer (SJ), the 1981–1988 Jeep J10 and J20, the 1981–1985 Jeep Scrambler, the 1981–1990 Jeep Wagoneer (SJ) and the 1987–1993 Jeep Wrangler (YJ).
The list does not include the 1994–2006 Jeep Grand Cherokee or the Wrangler TJ and LJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The joints are lubeable, so pack them with grease during a rebuild. Because the position is recorded as center, measure the driveshaft you are replacing before buying.
What’s included
It is a U-joint kit. Check the parts in the kit against your driveshaft before starting.









