Select your vehicle

Crown Automotive Dana 30/44 Upper Ball Joint – J8122495

Crown Automotive

$59.27In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 4:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Upper ball joint for front Dana 30 Standard and Dana 44 axles
  • Fits Jeep CJ5, CJ6, CJ7, J10, J20 and Scrambler models, 1972 to 1988
  • Part number J8122495, UPC 848399067231

Description

Overview

The Crown Automotive J8122495 is an upper ball joint for the front Dana 30 Standard or Dana 44 axle on Jeep CJ5, CJ6, CJ7, J10, J20 and Scrambler models built from 1972 to 1988. The upper ball joint connects the upper control arm to the steering knuckle, so the front wheel can pivot for steering while the suspension moves up and down.

Crown Automotive has supplied replacement Jeep parts for more than 50 years and carries many factory-discontinued items. This joint covers the upper position only. The lower ball joint is a separate part, so rebuilding both positions needs two different part numbers.

Key features

  • Upper position for the front axle
  • Designed for Dana 44 and Dana 30 Standard front axles
  • Replacement joint for classic Jeep CJ, J-series and Scrambler trucks
  • Covers model years 1972 to 1988

Upper joint wear and checks

The upper joint carries load from the upper control arm to the knuckle, and it pivots every time the wheel steers and travels over bumps. Wear shows up as play at the stud, torn boots, or dried grease. Any of these signs means the joint is due for replacement, even if the vehicle still drives normally.

To check for play, lift the front end safely and watch the top of the wheel while another person moves it in and out, or use a pry bar at the joint. Many rebuilds replace upper and lower joints in the same job, since they wear together and share the same loads.

  • Look for play at the stud
  • Inspect the boot for tears
  • Check grease condition at the joint
  • Replace both joints together where practical

Specifications

Brand Crown Automotive
Part number J8122495
UPC 848399067231
Position Upper
Axle location Front
Axle type Dana 44 or Dana 30 Standard
Model years covered 1972 to 1988

Vehicle fitment

It fits front Dana 30 Standard or Dana 44 axles on these Jeep models:

  • 1972–1983 Jeep CJ5
  • 1972–1975 Jeep CJ6
  • 1976–1986 Jeep CJ7
  • 1974–1988 Jeep J10 and J20 trucks
  • 1981–1985 Jeep Scrambler

Jeep Wrangler YJ, Cherokee and Wagoneer models are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting, and plan to source any hardware you need, such as nuts, cotter pins or a grease fitting.

Not included: the lower ball joint, which is a separate part.

SKU: CROJ8122495 Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 4.00 × 4.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep CJ51972–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ61972–1975Base
Jeep CJ71976–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade
Jeep J101974–1988Base
Jeep J201974–1988Base
Jeep Scrambler1981–1985Base, Laredo, Renegade, SL, SR

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which Jeep models does the Crown Automotive J8122495 fit?

It fits the CJ5 (1972–1983), CJ6 (1972–1975), CJ7 (1976–1986), J10 and J20 trucks (1974–1988) and Scrambler (1981–1985). Wrangler YJ and Cherokee models are not covered, so confirm your model year before ordering.

Is the J8122495 an upper or a lower ball joint?

It is an upper ball joint for the front axle. The lower ball joint is a separate part, so plan to get it separately if both joints need replacing.

Which axles does it match?

It is made for front Dana 44 and Dana 30 Standard axles. Check your axle housing and confirm the axle type before ordering, since no other axle type is covered.

How do I check an upper ball joint for wear?

Lift the front end safely and check for play at the joint, either by moving the wheel while watching the joint or with a pry bar. Torn boots, dry grease or visible movement at the stud mean the joint should be replaced.

Should both ball joints be replaced together?

Many rebuilds replace upper and lower joints in the same job because they wear together and share the same loads. Replacing one joint while the other is worn can leave the front end out of alignment sooner than expected.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon