Overview
The Crown Automotive 5012432AA is an upper and lower ball joint kit for Dana 30 TJ front axles. The kit includes castle nuts and grease, and it fits the 1999–2004 Jeep Grand Cherokee (WJ).
Both joints are lubeable, and the kit is for the front axle position.
Key features
- Upper and lower ball joints
- Castle nuts included
- Grease included
- Lubeable
- Front axle location
Ball joint wear signs
Ball joints carry the weight of the front axle and let the wheel steer and move up and down. Because they wear slowly, the first signs are often a slight wander or a clunk when the wheel passes over a bump. Uneven tire wear along the edges can also point to a worn joint, so check the tires alongside the joints.
Upper and lower joints are usually replaced as a pair, since they wear at similar rates on the same axle. Castle nuts and cotter pins should be replaced when a joint is removed, and grease fittings should be cleaned before the new joint is installed. Keep the steering and suspension parts in mind when diagnosing a problem.
- Check for torn or split boots
- Look for play when the wheel is lifted
- Replace castle nuts during installation
- Confirm the grease is fresh before fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5012432AA |
| UPC | 848399031829 |
| Axle location | Front |
| Axle type | Dana 30 TJ |
| Kit type | Upper and lower ball joint kit |
| Lubeable | Yes |
| Included | Castle nuts and grease |
Vehicle fitment
It fits the 1999–2004 Jeep Grand Cherokee (WJ) in the Laredo, Limited, Overland, Special Edition and Sport trims.
Other Grand Cherokee generations and Wrangler models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Upper and lower ball joints, castle nuts and grease.









