Overview
The Crown Automotive connecting rod bolt, part number J4486626, fits 4.2L and 4.0L 6 cylinder engines, 304 and 360 V8 engines and 2.5L engines. Connecting rod bolts fasten the rod cap to the rod. It fits Jeep Cherokee, CJ, Comanche, Grand Wagoneer, Scrambler, Wagoneer and Wrangler YJ models from 1981 to 1995.
Key features
- Connecting rod bolt for 6 cylinder, V8 and 2.5L engines
- Part number J4486626 from Crown Automotive
- Fits 1981 to 1995 Jeep models
- Covers the engine sizes listed below
Rod bolt replacement
A connecting rod bolt holds the rod cap to the rod while the crank turns it thousands of times a minute. The bolt is stretched to a set clamp load, and that stretch is what keeps the joint tight, so the bolt is critical to the rotating assembly rather than an ordinary fastener.
Rod bolts are usually replaced in sets during a rebuild, and new ones are normally fitted when the old bolts have been torqued several times. Clean the threads, use the lubricant the builder specifies, and tighten in the correct sequence with a calibrated torque wrench.
- Replace bolts that show thread damage or stretch
- Use a torque wrench calibrated for the job
- Follow the builder’s torque sequence exactly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J4486626 |
| UPC | 848399062458 |
| Type | Connecting rod bolt |
| Engine applications | 4.2L and 4.0L 6 cylinder; 304 and 360 V8; 2.5L |
Vehicle fitment
It fits these vehicles: 1981–1983 Cherokee (SJ); 1984–1993 Cherokee (XJ); 1981–1983 CJ5; 1981–1986 CJ7; 1986–1992 Comanche; 1984–1991 Grand Wagoneer (SJ); 1981–1985 Scrambler; 1981–1990 Wagoneer (SJ); and 1987–1995 Wrangler (YJ).
Wrangler TJ and LJ models and Cherokee models from 1994 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connecting rod bolts are torque-critical fasteners, so follow the engine builder’s torque specifications for installation.
What’s included
The item is a single connecting rod bolt.









