Overview
The Crown Automotive J3172135 is an outer bearing cone for the AMC Model 20 rear axle. It fits the 1976–1986 Jeep CJ5, CJ7 and J10 and the 1981–1985 Scrambler.
A bearing cone is the inner element of a tapered roller bearing, the part that rides on the axle and carries the rollers. This one is the outer bearing cone for an AMC Model 20 axle.
It is sold as a direct fit replacement axle bearing.
An outer bearing cone on the rear AMC Model 20 axle works with a matching cup, which stays in the axle tube end or hub. This part is sold alone, so the cup must be sourced separately if it needs replacing. The J10 truck is covered alongside the CJ range, and the J10 shared the Model 20 rear axle.
Key features
- Outer bearing cone
- AMC Model 20 axle
- Axle bearing
- Direct fit
Bearing wear and preload
Tapered roller bearings on the axle carry load in two directions, and the cone is the part that takes the rolling contact from the rollers. Over time the contact surface can pit or develop a polished track, which shows up as a rumble or hum that rises and falls with road speed. Wheel play that feels loose at the hub is another sign the bearing has lost its fit.
When fitting a new cone, keep it clean and seated square against its mating cup. Set the bearing adjustment carefully, because too little preload lets the hub wander and too much heats the bearing quickly. Packing the hub with the correct grease also helps the new bearing last.
- Rumble or hum that changes with road speed
- Loose feel at the hub or wheel play
- Heat around the hub after a drive
- Rough or rough-feeling rotation when the hub is turned by hand
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3172135 |
| UPC | 848399058123 |
| Part type | Axle bearing (outer bearing cone) |
| Axle | AMC Model 20 |
| Position | Outer |
Vehicle fitment
It fits the following vehicles, with trims noted for each:
- 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade)
- 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
- 1976–1986 Jeep J10 (Base)
- 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR)
CJ5, CJ7, J10 and Scrambler years are listed. The J20, the Wrangler and the Cherokee are not. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One bearing cone, part number J3172135.
Not included: the matching bearing cup, seals and axle hardware.









