Overview
The Fabtech K2303DL is an 8 in. lift coilover conversion kit that includes Front Dirt Logic Resi 4.0 shocks. The conversion swaps factory springs for coilovers mounted over the axle. No vehicle years, makes or models are given for this kit.
Shock length and lift height
A lift this large changes how far the shocks extend and compress, so shock length and travel should be matched to the new ride height. Shocks that run out of extension can strain mounts, while shocks with too little compression travel can bottom out sooner. Check the setup closely at full droop and full compression.
Driveline angles also change when the axle moves, which can add vibration at highway speed. Brake hoses and wiring may need to stretch further, so look for strain at full suspension travel. Driveshaft and CV angles are often part of the post-install check. Plan this check soon after installation, not months later.
- Check shock extension at full droop
- Inspect brake hoses for strain
- Verify driveline angles after the lift
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2303DL |
| UPC | 674866105973 |
| Lift height | 8 in. |
| Front shocks | Front Dirt Logic Resi 4.0 |
Vehicle fitment
Fitment depends on your year, model and trim, so match those details before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An 8 in. lift is a large change to ride height, so plan a full alignment and a driveline angle check once the conversion is in place.
What’s included
The kit includes Front Dirt Logic Resi 4.0 shocks. Before starting, check what else your installation will need, such as other shocks and hardware.









