Overview
The Fabtech K2229DL is a 6 in. lift coilover conversion kit that includes Front Dirt Logic 4.0 Resi coilovers. A spring over conversion mounts the coilovers over the axle in place of the factory coil springs.
No vehicle years, makes or models are named for this kit, so confirm fitment before installation.
Choosing a spring over setup
Spring over conversions move the springs and dampers onto the axle, so the load path through the front suspension changes from factory coil springs. That shift affects how the control arms, track bar and sway bar links carry load, so inspect those parts before fitting new coilovers. Many owners replace worn bushings and links at the same time because they work directly with the new geometry.
Plan for the change in steering feel that comes with a taller front end. Once the coilovers are in, recheck mount bolts after the first few drives and look for rubbing against tires, brake lines and body panels at full articulation. Tire size and wheel offset also matter, because larger tires change how much clearance the coilovers need.
- Replace worn bushings and links during the conversion
- Recheck mount bolts after the first drives
- Inspect brake lines for strain at full droop
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2229DL |
| UPC | 700008131351 |
| Lift height | 6 in. |
| Front coilovers | Front Dirt Logic 4.0 Resi |
Vehicle fitment
Verify fit against your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Raising ride height by 6 in. changes alignment and driveline angles, so plan an alignment and a driveline angle check after the coilovers are installed.
What’s included
The kit includes Front Dirt Logic 4.0 Resi coilovers. Before starting, confirm which rear parts and hardware you need to have on hand.









