Overview
The Fabtech K2241DL is a 6 in. lift coilover conversion kit supplied with Front Dirt Logic 2.5 Resi coilovers. The conversion mounts coilovers over the axle in place of factory coil springs.
Alignment and driveline checks
Coilover conversions change how the suspension loads the frame and axle, so the mounts and brackets carry different forces than factory springs did. Once the ride height moves, the steering geometry and driveline angles shift as well. Schedule an alignment and inspect the driveline after installation, and recheck the mounts after the first few drives.
Coilover conversions also change the amount of travel the shock uses, so bump stops and brake lines should be checked for clearance. Look for binding at full turn, rubbing on the tire, and any sign that the coilovers are sitting unevenly. Tighten fasteners to the torque the installation calls for, and recheck them after a short period of driving.
- Check brake lines and hoses for stretch
- Inspect bump stops for clearance
- Recheck fasteners after the first drives
- Verify the alignment before a long trip
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K2241DL |
| UPC | 700008131381 |
| Lift height | 6 in. |
| Front coilovers | Front Dirt Logic 2.5 Resi |
Vehicle fitment
Coilover conversions depend on the axle and mounting points of each vehicle, so compare them with your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Raising the ride height this far alters steering and driveline geometry, so schedule a wheel alignment and driveline check after installation.
What’s included
The kit includes Front Dirt Logic 2.5 Resi front coilovers. Check the package contents against your installation before starting, including any rear parts and mounting hardware you may need.









