Overview
This G2 Axle and Gear carrier shim, UPC 682034188062, sets bearing preload or position in an axle carrier. Its part number, thickness and axle model are unknown from this item.
Measure the shim you are replacing before choosing a new one, and match it to your carrier’s requirements.
Preload and carrier shims
Carrier shims set the position of the differential carrier and the preload on its bearings. Too little preload can allow the gears to move under load, while too much can overheat the bearings. Shims usually come in packs of different thicknesses, so a stack is built up to reach the correct clearance.
Shims are often reused only when they are undamaged and their thickness is known. Creased, scored or bent shims should be replaced rather than straightened. When a carrier has been opened, check the bearing cups and the carrier housing for wear before reassembly, since a worn seat can throw off the shim stack.
- Measure each shim before reuse
- Replace creased or scored shims
- Check bearing cups and housing seats
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| UPC | 682034188062 |
| Type | Carrier shim |
Vehicle fitment
No axle or vehicle is named for this carrier shim. Carrier shims are matched to a specific differential carrier, so confirm the application with the manufacturer first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A single carrier shim type is named, with no quantity or thickness given.






