Overview
The G2 Axle and Gear carrier shim, part number 15-SK28, is a differential pinion and carrier shim. It is a thin spacer used when setting bearing preload and gear position in a differential carrier, and it is catalogued under differential pinion and carrier shims. Measure the shim you are replacing to confirm its thickness before installing.
Setting carrier preload
Pinion and carrier shims set the position and preload of the bearings in a differential carrier. When a carrier is rebuilt, the shims are removed and measured, then replaced with a stack that brings the bearings to the correct preload and the gears to the correct mesh. Small changes in thickness can noticeably change how the gears run, so shims should be checked with a micrometer.
Keep shims clean and free of burrs before installing them, since debris between the shim and the housing shifts the setting. Check the bearing preload with a torque wrench after assembly, and recheck gear contact with marking compound before the carrier goes back in. A carrier that runs noisy or hot after a rebuild often points to a shim or preload issue.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 15-SK28 |
| UPC | 682034188109 |
| Part type | Differential carrier shim |
Vehicle fitment
Confirm the carrier model and shim size against your axle before fitting.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One carrier shim is included. Check the quantity and any hardware against your installation before starting.






