Overview
The Carr Deluxe Rotabar light bar, part number CAR210871, is a windshield-location light bar with black powdercoated aluminum side caps and a center cross bar. It mounts to the roof gutter, and Carr says many vehicles with internal gutters can use its stainless steel gutter mount kit.
The Rotabar feature lets the bar rotate down, which Carr describes as extra clearance or a way to protect the lighting. Carr offers the bar in XM3, XP3 and XP4 finishes. XM3 bars have a stainless steel cross bar, while XP3 and XP4 bars have a powder coated cross bar.
Key features
- Rotates down for extra clearance or to protect the lights
- Black powdercoated aluminum side caps and center cross bar
- Mounts securely to the roof gutter
- Stainless steel gutter mount kit option for many vehicles with internal gutters
- Available in XM3, XP3 and XP4 finishes
- Maximum weight capacity of 4 lbs for the light bar
Roof gutter installation checks
A roof-gutter light bar sits high and catches wind at speed, so the mount has to hold firm through sustained airflow. Before drilling anything, confirm the gutter type on your truck. Vehicles with internal gutters and vehicles with exposed gutters can need different hardware, so check the gutter type first.
The rotate-down feature helps when the bar is not in use, but the hinge still needs regular checks. Look for loose pivot points and worn bushings, and avoid driving with the bar folded in a position that rubs the roof. Keep wire slack at the pivot so the bar can swing without pulling on connectors.
Wiring for roof bars is usually run through the cab pillar or along the roof edge. Use a fused circuit near the battery, and keep the harness clipped so wind does not flap it. Clean the aluminum caps and cross bar after off-road trips to remove grit that can scratch the powder coat.
Specifications
| Brand | Carr |
|---|---|
| Part number | CAR210871 |
| UPC | 47185008711 |
| Product type | Light bar |
| Mounting location | Windshield |
| Finishes | XM3, XP3, XP4 |
| Cross bar | Stainless steel (XM3); powder coated (XP3, XP4) |
| Side caps | Black powdercoated aluminum |
| Maximum weight capacity | 4 lbs |
Vehicle fitment
Carr’s manufacturer list covers Chevrolet Avalanche, Colorado, Silverado, Suburban, Tahoe and Trailblazer; GMC Canyon, Envoy, Sierra and Yukon; Dodge Dakota and Ram; Ford Expedition, F-150 and Super Duty; Jeep Commander, Grand Cherokee WJ and WK; Nissan Frontier and Xterra; and Toyota 4Runner, FJ Cruiser, Sequoia, Tacoma and Tundra. Model years in the list run from 2004 to 2018, and most entries are limited to specific trims.
Models not on the list, including the Jeep Wrangler and any model year after 2018, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Vehicles with internal gutters are mounted with the stainless steel gutter mount kit Carr describes. Keep any lights within the 4 lb maximum weight capacity, and secure all mounts before driving.
What’s included
Check the package contents against your installation before starting.
Not included: lights, which Carr sells separately.












