Overview
The Westin Pillar LED Light Mount, part number 09-41035, is a set of brackets that mounts a 50 inch LED light bar to the pillars of a 2007–2016 Jeep Wrangler JK. Westin sells it as a set of two.
The brackets attach to the pillars through the existing OE bolt points, so installation needs no drilling. The base of each pillar also has light mounting points for single post lights.
Key features
- Bolt-on installation using existing OE bolt points, no drilling required
- 7 gauge mild steel construction in textured black
- Stainless steel fasteners for corrosion protection
- Foam gaskets included to protect the vehicle finish
- Light mounting points at the pillar base for single post lights
- 3 year warranty
Pillar mount fit and load
Pillar mounts carry the weight of a long light bar and shift it at the windshield frame, so they work best when the pillar points are clean and firm. Before tightening, make sure the mount sits square and the foam gaskets cover the contact points. Vibration from rough trails can work fasteners loose over time, so re-check them after the first few drives.
A 50 inch bar catches more wind than a short pod, which adds stress on the brackets at highway speed. Keep the bar aimed and secured before driving, and avoid hanging extra loads from the mount. Inspect the steel for surface rust or cracks along welds, and touch up any bare spots to slow corrosion.
- Clean pillar contact points before mounting
- Check gasket seating after installation
- Inspect welds and finish at regular service
Specifications
| Brand | Westin |
|---|---|
| Part number | 09-41035 |
| UPC | 707742063552 |
| Material | 7 gauge mild steel |
| Finish | Textured black |
| Fasteners | Stainless steel |
| Light bar supported | 50 inch LED light bar |
| Sold as | Set of 2 |
| Warranty | 3 years |
Vehicle fitment
It mounts a 50 inch LED light bar to the pillars of 2007–2016 Jeep Wrangler JK models, including the 70th and 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, plus Unlimited versions with the same trims and the X trim.
The list stops at 2016, so 2017 and 2018 JK models and all JL models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on with no drilling. Check that the existing OE bolt points are present and undamaged before mounting the brackets, and secure the light bar fully before driving.
What’s included
The set includes two mounts, stainless steel fasteners and foam gaskets.
Not included: the 50 inch LED light bar the mount is designed to hold.









