Overview
The N-Fab Roof Mounted Light Brackets in Textured Black, catalog number T0650LR-TX and part number N/FT0650LR-TX, are side-mount brackets for fitting lights to the roof of a 2007–2014 Toyota FJ Cruiser. The bracket is a direct fit for that vehicle, including the Base, TRD Special Edition and Trail Teams Special Edition trims.
N-Fab makes nerf bars, pre-runners and other off-road accessories for trucks and SUVs dating back to the 80s. The brand describes these brackets as heavy duty tubular parts built from heavier gauge steel, with an all-welded one-piece construction, a zinc coat for corrosion protection and a thick high-gloss powder coat for a long-lasting finish. Those descriptions are N-Fab’s own wording. The bracket suits owners who want a steel roof light mount with a textured black finish on an FJ Cruiser.
Key features
- All-welded, one-piece tubular construction
- Heavier gauge .084 wall steel.
- Zinc coated for added corrosion protection
- Thick high-gloss powder coat in a textured black finish
- Side mount design for roof-mounted lights
- Direct fit for the 2007–2014 Toyota FJ Cruiser
Roof light mounting considerations
A steel roof bracket carries the weight of the light and adds leverage at the mount points. Keep the bar close to the roof and avoid heavy overhang, since a long lever arm puts extra stress on the bolts and the roof skin. Plan the light’s position first, then check clearance around the roof edge and any roof rack before tightening.
Steel brackets hold up well when the finish stays intact. After rough trail use, look for chips in the powder coat and touch up bare spots promptly. Wiring should run through a fused relay, with the harness secured away from wind noise and moving parts.
Before fitting, think about which lights you will mount and how their wiring will reach the cabin. Choose lights rated for the same mounting position you plan, and keep the bolts clean so they can be removed later for service.
- Keep the light close to the roof
- Touch up chips in the powder coat
- Use a fused relay for any powered light
- Keep mounting bolts clean for service
Specifications
| Brand | N-Fab |
|---|---|
| Part number | N/FT0650LR-TX |
| Catalog number | T0650LR-TX |
| Material | Steel, .084 wall |
| Construction | All-welded, one-piece |
| Finish | Textured Black, high-gloss powder coat |
| Corrosion protection | Zinc coated |
| Mount type | Roof mounted, side mount |
| Fitment listing | Direct Fit |
Vehicle fitment
It is designed for the 2007–2014 Toyota FJ Cruiser, including the Base, TRD Special Edition and Trail Teams Special Edition trims.
Confirm your FJ Cruiser’s model year and trim before ordering, since other Toyota SUVs and trucks are not covered.
Installation notes
If you wire lights to these brackets, use a fused relay and check local rules on road-use lighting. The brand’s description gives no mounting steps, so position the lights and check roof clearance before you tighten the final fasteners.
What’s included
Compare the package contents with your own setup before starting.









