Overview
The California Super Trucks CSK-D23-2 is a 4-inch spindle lift kit for 2002-2008 Dodge 2WD trucks. The manufacturer fitment list covers the 2002-2008 Dodge Ram 1500 in the models shown on the list.
The front lift comes from CST lift spindle uprights, which allow the front end to be leveled without changing the stock ride. The rear is leveled with a 1-inch lift block and U-bolt kit.
Key features
- 4-inch lift spindles at the front
- 1-inch rear lift block and U-bolt kit
- Designed to fit 33-inch tires with 8-inch wide wheels
- Rear shocks offered by the manufacturer for a better ride
Rear leveling and driveline
Front spindle lifts and rear blocks often work together to level a truck, but they do not raise the rear the same way. A rear lift block moves the axle upward, which changes pinion angle and can affect the driveshaft. Because the lift is split between the front and rear, the leveled stance depends on how both ends are set.
U-bolts can settle after the first drives, so retightening them is part of a normal break-in. Check the shock mounts, brake lines and any rubbing at the wheel wells once the truck is back on the ground. Larger tires add load and can increase rubbing, so recheck clearance after any tire change.
- Retighten U-bolts after the first drives
- Check driveline angles after installation
- Inspect brake lines for stretch
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSK-D23-2 |
| UPC | 70000540415 |
| Lift height | 4 inches |
| Lift height range | 3 to 4.99 inches |
| Front | Lift spindle |
| Rear | 1-inch lift block, U-bolt kit |
| Tire size | 33-inch tires, 8-inch wide wheels |
| Shocks | Not required, rear shocks offered |
Vehicle fitment
The manufacturer fitment list covers the 2002-2008 Dodge Ram 1500, in the Laramie, SLT, SRT-10, ST, SXT and Sport models shown on the list.
Match your truck’s drive type, year, model and trim to the fitment above before ordering.
Installation notes
The rear uses a 1-inch lift block with a U-bolt kit, so check the driveline angles after installation. Shocks are not required, but the manufacturer offers rear shocks for a better ride.
What’s included
Front lift spindles, a 1-inch rear lift block, a U-bolt kit and a hardware kit.








