Overview
The California Super Trucks CSK-D1-5-2 is a 4-inch lift kit with cast spindles. The manufacturer fitment list covers the 2002-2005 Dodge Ram 1500 in the Laramie, SLT, SRT-10 and ST models shown on the list.
The lift range is 3 to 4.99 inches. The kit does not include shocks.
Key features
- 4-inch lift kit
- Cast spindles
- Direct fit for the listed Ram 1500 models
Shock and spindle planning
Cast spindles are a common replacement on older Ram 1500 trucks, and they carry the steering and the front hub in one part. Because the lift changes the angle of the spindle, the ball joints and tie rod ends see more load than before. Inspect them for play and torn boots at regular service intervals.
Shocks are a separate purchase with this kit, so choose them to match the new ride height. A shock that is too short for the lifted suspension can bind at full droop, while one that is too long may run out of stroke. Pair the shocks with the bump stops so the suspension does not bottom out on rough roads.
- Check the wheel bearings for play
- Look for torn ball joint boots
- Inspect the bump stops after installation
- Recheck wheel lug torque after the first drives
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSK-D1-5-2 |
| UPC | 700007591691 |
| Lift height | 4 inches |
| Lift height range | 3 to 4.99 inches |
| Spindles | Cast |
| Shocks | Not included |
Vehicle fitment
The manufacturer fitment list covers the 2002-2005 Dodge Ram 1500 in the models shown on the list.
It fits the 2002-2005 Ram 1500 models listed. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
Includes the 4-inch lift kit with cast spindles.
Not included: shock absorbers.








