Overview
The California Super Trucks CSK-C3-17-2 is a 6 to 8 inch STL lift kit with shocks. STL, or Stock Torsion Location, keeps the stock torsion bar location and adds a subframe and fabricated knuckles to set the new ride height. The fitment type is direct fit.
Key features
- 6 to 8 inch lift range
- Subframe and fabricated OEM trac width knuckles
- Skid plate and center link
- Rear shocks included
Alignment after a major lift
A subframe-based kit changes the geometry of the front end more than a spacer-only lift, so the new knuckle and subframe positions set camber, caster and toe. An alignment shop will need to measure the full setup rather than a standard front-end check. Driveline angles should be measured at the same time, because raising the axle and transfer case moves the joints.
Related parts often replaced with this type of build include the brake lines, which may need extra length, and the steering components that take a new angle. Inspect the stock bump stops and check that the skid plate has clearance from the exhaust and fuel lines. Re-check fasteners after the first highway run and again after off-road use, since new components settle as they are loaded.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSK-C3-17-2 |
| UPC | 700007591471 |
| Lift range | 6 to 8 inches |
| Suspension type | STL, with shock |
| Subframe | One piece |
| Knuckles | Fabricated OEM trac width |
| Shocks | Rear shocks included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit. Work out the correct year, model and trim for your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An STL kit replaces major suspension parts, so it requires alignment and a check of driveline angles after installation. The kit includes a skid plate, which should be fitted with the subframe.
What’s included
- One subframe
- Fabricated OEM trac width knuckles
- Skid plate
- Center link
- Rear shocks
- Hardware









