Overview
The California Super Trucks CSR-6524B is a front 2.0 reservoir shock absorber for 2011–2018 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. Two units are needed, and companion part CSS-C33-4 is used with it.
Built gas charged with bushing mounts, this reservoir shock carries a printed lift range of 10 – 9.5 in. Confirm that figure against your planned height.
Key features
- Front 2.0 reservoir shock
- Gas charged
- Two units required.
- Bushing mounts instead of heim joints
Running a matched pair
Shocks that work in pairs should be matched closely, so both units on the same axle respond alike when the suspension compresses and rebounds. Mismatched damping can pull the truck to one side under braking or leave one end bouncing longer than the other. When two identical units are fitted, the set behaves more predictably on washboard roads and on uneven ground.
Before fitting, look at the bushings, the threaded ends and the reservoir hoses for cracks, leaks or dried oil. Replace worn bushings and check the mounting hardware for proper torque after the first few drives. A companion part should be checked against the rest of the build so that clearance, travel and the gas canister position are right before the truck goes back into service.
Heavier loads and larger tires put more demand on dampers, so consider the total weight and tire diameter when deciding whether to change other suspension parts at the same time. Keep the pair in matching condition by replacing both units together when one wears out.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSR-6524B |
| UPC | 700007539741 |
| Position | Front |
| Type | 2.0 reservoir shock |
| Hydraulic / gas charged | Gas charged |
| Lift range (as printed) | 10 – 9.5 in. |
| Quantity required | 2 |
| Companion part | CSS-C33-4 |
| Mounting | Bushings |
Vehicle fitment
Chevrolet and GMC 2500 HD and 3500 HD trucks from 2011 through 2018 are the models named in the list for this shock.
Models and years outside that range are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With two required, both front positions are covered by the stated quantity. Companion part CSS-C33-4 should be checked against your build before the shocks go in.
What’s included
Required hardware comes with the shock.
Not included: companion part CSS-C33-4, used with this shock.


















