Overview
The Brandmotion SummitView Adjustable Rear Vision System, part number SUTV-8847, is a backup camera kit for the Jeep Wrangler JK with the factory display radio. The kit is built to work with the factory 6.1-inch display.
The kit uses a CMOS camera and a stainless steel bracket designed to fit the Wrangler. It is made for vehicles with virtually any wheel, including the spare tire, and includes a programming module. The module plugs temporarily into the OBD-II port to flash the radio, and no dealer activation is required.
Key features
- CMOS rear camera for backing up at night
- Stainless steel bracket for the Wrangler JK
- Works with virtually any wheel, including the spare
- Programming module flashes the factory display radio through the OBD-II port
- Designed for MyGig radios, navigation and non-navigation
- Compatible with automatic and manual transmissions
- Works with standard parking gridlines
Connecting the camera wiring
A rear camera is only as good as its mounting and wiring. Route the cable away from exhaust heat, moving parts, and the tailgate hinge so the insulation does not chafe. Check the lens for dirt or road film each time the vehicle is washed, since a dirty lens reduces what the screen shows at night and in rain.
Gridlines on a backup image show distance only if the camera is aimed correctly, so set the view on level ground and check it against the bumper or tailgate edge. A spare tire mount changes the view angle, so recheck alignment after any tire change. Keep the module connection clean and secure when updating later.
- Route cable away from heat and moving parts
- Clean the lens during regular washing
- Recheck aim after changing the spare tire
Specifications
| Brand | Brandmotion |
|---|---|
| Part number | SUTV-8847 |
| Camera | CMOS |
| Display | Factory 6.1-inch display |
| Radio | MyGig, navigation and non-navigation |
| Programming | Module plugs into the OBD-II port |
| Transmission | Automatic and manual |
| Bracket | Stainless steel |
Vehicle fitment
The kit is made for the Jeep Wrangler JK with the factory display radio, which covers the 2007-2018 Wrangler (JK).
The kit is written for the Wrangler JK and its factory display. Other Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The programming module plugs temporarily into the OBD-II port to flash the radio, so it is only needed during setup. No dealer activation is required.
What’s included
The rear vision camera kit with the stainless steel bracket and the programming module.










