Overview
The Brandmotion 9002-7601 is a universal dual mount CMOS backup camera with parking gridlines, image reversing and a 33 feet harness. It can be installed behind the license plate or on a flat vehicle surface. Brandmotion marks this kit universal fit, so it is not built for one particular model or model year.
The camera is an aftermarket option rather than an OEM part. Image reversing supports forward mounting applications, and the camera outputs through a standard RCA plug, so it can connect to any display with that input. The harness is included and is 33 feet long, which sets the practical reach from the mount point to the display.
Key features
- Two mounting options: license plate bracket or small mount bracket
- Parking gridlines that can be switched off during installation
- Image reversing for forward mounting applications
- 33 feet harness included
- Standard RCA plug for connecting to a display
- Two adjustable bracket options
Mounting and wiring tips
A backup camera is only useful when it is aimed and wired correctly. Mount it low and centered so the image shows the area directly behind the bumper, and check the picture before tightening the bracket. Gridlines help judge distance once they line up with the vehicle centerline, so take a few minutes to test the alignment with the vehicle in reverse.
Cable routing is where most installs take longer than expected. Keep the RCA run away from sharp edges, moving suspension parts and heat sources, and secure it with clips at regular intervals. Leave a small service loop at each end so the connections can be reached if the display is moved later.
Moisture and vibration are the common wear points for exterior cameras. Inspect the lens for cracks or fogging after rough trips, check the bracket bolts, and wipe the lens clean with a soft cloth. Seal any connectors that sit outside the cabin.
Specifications
| Brand | Brandmotion |
|---|---|
| Part number | 9002-7601 |
| Camera type | CMOS |
| Harness length | 33 feet |
| Small mount surface | Minimum 1.5 inches wide by .75 inches deep |
| Parking lines | Gridlines, can be turned off during installation |
| Image reversing | Yes, for forward mounting applications |
| Video output | Standard RCA plug |
| Fitment | Universal fit |
Vehicle fitment
Brandmotion marks this kit universal fit. It is not tied to a specific year, make, model or trim. Any vehicle with a license plate can use the license plate bracket. If the vehicle has no plate position, the small mount bracket needs a flat area at least 1.5 inches wide by .75 inches deep.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the camera on the vehicle centerline when you rely on the gridlines, so they line up with the center of the vehicle. Turn the gridlines off during installation if the alignment is not yet right. Plan the route for the 33 feet harness before you start, because it has to reach the display. Disconnect the battery before wiring to avoid short circuits.
What’s included
The kit includes the camera, the 33 feet harness and two adjustable bracket options. The camera offers image reversing for forward mounting.
Not included: A display is not included. The camera connects to any display with a standard RCA plug, so confirm the display has a matching RCA input before ordering.












