Overview
The Brandmotion Radar Blind Spot System with Cross-Traffic Detection, part number BRARDBS-1500, is a retrofit radar blind spot monitoring kit that adds blind spot and cross-traffic detection to vehicles with a CAN-BUS speed signal. It is a universal solution rather than a kit for one named vehicle, and it fits vehicles from the 2007 model year and newer.
The kit works with any vehicle with plastic fascias, meaning all bumpers except metal pickup truck bumpers. It uses CAN data to obtain vehicle speed. The kit includes all necessary mounting hardware, including under rear fascia sensor mounting brackets.
Key features
- Radar-based blind spot monitoring with cross-traffic detection
- Uses CAN data to obtain vehicle speed
- Works with soft plastic rear fascias, not metal bumpers
- Designed to reduce false triggers common in other systems
- Under rear fascia sensor mounting brackets included
- Built on automaker-validated components
Setup and checks before use
A blind spot radar works alongside your mirrors, not in place of them. Its warnings cover areas beside and behind the vehicle that mirrors often miss, but the system still relies on your own checks before changing lanes or backing out of a space. Treat each alert as a prompt to look again rather than a complete picture of traffic.
The sensors sit behind the rear fascia, so the bumper material and sensor position matter. Keep the fascia clean of mud and ice, since buildup can affect detection. After installation, test the warnings at low speed in an open area before relying on them on the road, and recheck bracket fit after rough off-road trips.
- Keep the rear fascia clean around the sensor area
- Test warnings in an open area before daily driving
- Recheck sensor brackets after rough trail use
Specifications
| Brand | Brandmotion |
|---|---|
| Part number | BRARDBS-1500 |
| Detection | Blind spot and cross-traffic |
| Technology | Radar with CAN-BUS speed input |
| Model year requirement | 2007 and newer |
| Rear fascia | Soft fascia only |
| Connection | OBDII pins 6 and 14 must be occupied |
| Mounting hardware | Included, with under rear fascia sensor brackets |
| Fitment type | Universal fit |
Vehicle fitment
The kit is universal rather than vehicle-specific. Brandmotion’s requirements are vehicles from the 2007 model year onward with a soft rear fascia and a CAN-BUS speed signal, and it cannot be modified for older vehicles. Brandmotion also lists known issue vehicles, including BMW and Mercedes models with auto start-stop and Subaru vehicles with starLink.
Vehicles with metal bumpers, metal pickup truck bumpers, and vehicles without a CAN-BUS speed signal are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
For vehicles with no known support, Brandmotion recommends a soft installation with everything in the passenger seat and the product placed into diagnostic mode to confirm it receives the speed signal. Do not install the HMI indicators until the product is confirmed to function properly. Treat the warnings as an aid and keep checking mirrors before changing lanes.
What’s included
Mounting hardware, including under rear fascia sensor mounting brackets.


















