Overview
A custom-fit monotube, the Bilstein 33-230344 comes from the 5125 Series and pairs a high gas pressure body with a 46mm piston. Bilstein positions the series for vehicles that lack a direct Bilstein fitment, which makes this unit a candidate for scratch builds.
The 5125 Series comes in several lengths and valve rates. Confirm the length and valve rate for this number before choosing it for a specific suspension setup.
Key features
- High gas pressure monotube construction
- 46mm piston with self-adjusting deflective disc valving
- Hourglass bushings at 5/8 inch, industry standard
- Eye/eye or stem/eye mount styles offered across the series
- Built for custom suspension projects
Choosing a custom shock
Custom shocks take the load off the frame and axle in a different way than factory units, because the mounting points and travel are set by the builder. A monotube body with a large piston keeps damping consistent as the oil heats during long runs over rough ground. Before buying, measure the compressed and extended lengths of the existing setup and the full travel the suspension needs, so the shock neither bottoms out nor runs out of stroke.
Bushings and mounts deserve the same attention. Hourglass bushings need matching eyes or studs, and a mismatch causes binding that shortens bushing life. Worn bushings are often replaced when the shock is serviced, so check them at the same time.
- Measure eye-to-eye length at full extension and compression
- Check bushing size against the brackets before ordering
- Replace worn bushings and hardware together
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-230344 |
| UPC | 651860727998 |
| Shock series | 5125 Series |
| Charge | Gas charged |
| Body design | Monotube, high gas pressure |
| Piston | 46mm |
| Valving | Self-adjusting deflective disc |
| Bushings | 5/8 inch hourglass |
| Mount style | Mount style is eye/eye or stem/eye across the series. Match the style to your brackets before ordering. |
| Fitment label | Universal Fit |
Vehicle fitment
No vehicle is attached to part number 33-230344. It carries the Universal Fit label, which means it is intended for custom mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your existing setup first, since length and mount style must match. Verify that your mounting hardware accepts 5/8 inch hourglass bushings before ordering.
What’s included
One shock absorber with 5/8 inch hourglass bushings. Compare the package contents with your installation before starting.









