Overview
The Bilstein 24-107624 is a 46mm monotube shock absorber from the 4600 Series. It fits the 2004–2008 Ford F-150 and the 2006–2008 Lincoln Mark LT. It is a heavy-duty, gas-charged shock with a yellow finish.
Bilstein’s monotube gas-charged design moves heat from the oil through the outer surface of the shock body, where it dissipates more efficiently. A dividing piston lets the oil expand as it warms, which limits foaming and viscosity loss, so the shock keeps its full damping as temperatures climb. The tube is extruded to a tight peak-to-valley tolerance with consistent wall thickness.
The piston head lets compression and rebound damping be tuned independently, and the design uses fewer parts than conventional twin-tube and road-sensing shock designs. Bilstein’s seamless monotube body adds tube strength while the heat path extends shock life.
Key features
- Monotube gas-charged design with a dividing piston that helps prevent oil aeration
- Seamless monotube body for superior tube strength and heat dissipation
- Tube extruded to tight peak-to-valley tolerance and consistent wall thickness
- Independent compression and rebound damping tuning
- Fewer parts than most conventional twin-tube and road-sensing shock designs
- Labeled heavy duty with a yellow finish
Heavy-duty shock upkeep
A heavy-duty monotube shock is built for trucks that carry loads and tow, and the gas charge is what keeps damping steady under those conditions. Keep tire pressure correct, and avoid driving with a loaded bed while a shock is worn, since the extra weight puts more work on each unit. Regular checks catch seepage before the damping drops off.
When choosing a monotube upgrade, consider the tires and the load the truck regularly carries. Larger tires can change the leverage on the shock, while a heavier bed rack or towing setup asks more of the damping. Check the upper and lower mounts after any change to the suspension, and look for oil leaks around the seal at each service.
- Inspect the seal and shaft for oil seepage
- Check mounts after tire or load changes
- Match both ends for balanced handling
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-107624 |
| UPC | 651860636405 |
| Old part number | BILF4-BE5-A762-H2 |
| Shock series | 4600 Series |
| Shock type | Monotube |
| Gas charging | Gas charged |
| Mounting / fitment | Direct fit |
| Shock diameter | 46mm |
| Finish | Yellow |
Vehicle fitment
It fits the 2004–2008 Ford F-150 in the FX2, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL and XLT trims, and the 2006–2008 Lincoln Mark LT Base.
Ford F-150 and Lincoln Mark LT model years outside the ranges above are not covered, and other Ford and Lincoln models are not covered either. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 46mm monotube shock absorber, Bilstein part 24-107624. Check whether mounting hardware is needed for your installation before starting.









