Overview
The Bilstein 5100 Series Ride Height Adjustable Shock Absorber, catalog number 24-251976, is a shock from Bilstein’s 5100 Series with ride height adjustment. It is a Direct Fit shock. Match your year, model and trim before you order this unit.
The catalog number is 24-251976 and the UPC is 651860772172. Compare the length and stroke with the shock being replaced before ordering.
Ride height adjustable shocks explained
Ride height adjustable shocks let you change the height of the vehicle by altering the shock’s effective length or preload, depending on the design. They are often used to set front or rear height after a suspension change, or to level a vehicle that sits lower on one side because of cargo or a trailer hitch.
Adjustment usually happens in small steps, so measure the height before and after each change and keep the readings. Make the same change on both sides of an axle to keep the vehicle level and the steering geometry consistent. After any adjustment, check that the shock has enough travel in both directions and does not bottom out on bumps.
Ride height adjustable units deserve regular inspection. Look for oil seepage, cracked bushings, loose mounts and any sign that the adjuster has slipped or stuck. If adjustment feels stiff or uneven, stop and check the mechanism before forcing it, and recheck the setting after the first few drives.
Specifications
| Brand | Bilstein |
|---|---|
| Series | 5100 Series |
| Catalog number | 24-251976 |
| UPC | 651860772172 |
| Adjustment | Ride height adjustable |
| Fitment type | Direct Fit |
Vehicle fitment
Fit is Direct Fit only, so confirm the year, model and trim against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.












