Overview
The Baja Designs Squadron-R Sport Fog Pocket Kit, part number 447068, is made for the metal bumper on the Jeep Wrangler JL Rubicon. It swaps the factory fog pocket lights for a pair of Squadron-R Sport LED lights and uses the stock mounting points, so the front end keeps its factory look.
Each light has four LEDs producing 2,260 lumens at 20W and 1.4A. The housing is hard anodized and powder coated cast aluminum at 3.07 x 2.77 x 3.07 in, with an LED life expectancy of 49,930 hours. The kit is made for the metal Rubicon bumper only.
Key features
- Pair of Squadron-R Sport LED lights
- 2,260 lumens per light from four LEDs
- Wire adapters for the OEM connectors
- Brackets that use the stock mounting points
- Hard anodized, powder coated cast aluminum housing
- LED life expectancy of 49,930 hours
Bumper type and trim check
Matching a fog light kit to the bumper is the first job, before any tools come out. Metal and plastic bumpers differ in weight, texture and how the mounting points sit. Run a hand along the lower face of the bumper and look at the fog pocket openings, then compare what you see with the bumper your vehicle came with. A mismatch leads to brackets that will not seat cleanly.
Trim names alone do not settle the question, since bumper options vary within a trim line. Check the bumper type on the vehicle itself. If the bumper has been replaced, the factory connectors and mounting points may no longer match the original setup, so confirm the fit before buying hardware or cutting any trim.
- Check the bumper by feel and by look
- Do not rely on trim name alone
- Confirm the fog pocket openings match the kit
- Ask a qualified installer if the bumper was replaced
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 447068 |
| UPC | 819314026978 |
| Light model | Squadron-R Sport |
| LEDs per light | 4 |
| Lumens | 2,260 per light |
| Wattage / amps | 20W / 1.4A |
| Dimensions | 3.07″ x 2.77″ x 3.07″ |
| Housing | Hard anodized and powder coated cast aluminum |
| Fitment | 2018 Jeep Wrangler JL, listed trims |
Vehicle fitment
The kit fits the 2018 Jeep Wrangler JL in Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims. It is made for the metal Rubicon bumper, so confirm your bumper type matches before installing.
Other Wrangler generations are not covered. A Rubicon with a plastic bumper needs the Sahara kit, part number 447071. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The wire adapters plug into the OEM connectors, so no splicing or soldering is needed and the factory fog switch can stay in use. Confirm the front bumper is the metal Rubicon type first, because the brackets are designed for that bumper.
What’s included
A pair of Squadron-R Sport LED lights, two sets of Jeep JL mounting brackets, plug and play wiring connectors, and mounting hardware.














