Overview
The Baja Designs Unlimited Fog Light Pocket Kit, part number 447567, is a fog light kit for the 2017-2021 Ford F-150 Raptor. It uses two Squadron Pro lights at 4,900 lumens each, two Squadron Racer lights at 4,300 lumens each and two S2 Pro lights at 2,450 lumens each.
The kit includes two vehicle specific mounting brackets and a wiring harness, so the factory fog light switch still operates the lights. It is sold as the Raptor Unlimited fog kit.
Key features
- Two Squadron Pro lights at 4,900 lumens each
- Two Squadron Racer lights at 4,300 lumens each
- Two S2 Pro lights at 2,450 lumens each
- Vehicle specific mounting brackets
- Wiring harness for the factory fog light switch
- Hard coated polycarbonate lens and billet machined aluminum bezel
Wiring and switch use
A factory-pocket fog kit changes how the front of the truck works in poor visibility. Because the lights share the factory fog switch, the switch is the main control point, so it helps to know which lights run when the switch is on and whether the harness is routed cleanly to it.
Six lights draw more current than a stock pair, so the harness and the switch circuit deserve attention before the first install. Keep the connectors dry, and check the harness after rough trail runs where branches or rock contact can rub the sheathing. Aim each pair after mounting and recheck once the brackets are fully tightened.
Lenses on large light sets collect dust and road film quickly. Wash them with mild soap, and inspect the seals each time the lights are cleaned for cracks or moisture.
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 447567 |
| Light set | Two Squadron Pro (4,900 lumens each), two Squadron Racer (4,300 lumens each), two S2 Pro (2,450 lumens each) |
| Mounting | Vehicle specific brackets |
| Switch | Factory fog light switch |
| Waterproof | IP69K, submersible to 9 feet |
| LED life | 49930 hours |
Vehicle fitment
It fits the 2017-2021 Ford F-150 Raptor.
It is not for other F-150 trims, or for the standard-bed Raptor kits such as 447566. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets mount to the vehicle, and the wiring harness connects to the factory fog light switch. Check the aim of the six lights after installation. Set the aim of each pair before the brackets are fully tightened, since the kit includes six lights. Keep the harness routed away from moving parts.
What’s included
Two Squadron Pro, two Squadron Racer and two S2 Pro lights, the vehicle specific mounting brackets and a wiring harness.












