Overview
The Baja Designs Squadron-R Pro Fog Pocket Kit, part number 447071, is a replacement fog light kit for the 2018 Jeep Wrangler (JL) with the plastic Sahara bumper. It is designed to keep the factory fit and finish while adding premium aftermarket LED output in the fog pocket.
The kit uses a pair of Squadron Pro lights, each with four LEDs rated at 4,900 lumens, for a combined output of 9,800 lumens. Each light is rated at 40W and 2.90A. The housings are hard anodized and powder coated cast aluminum, and the LED life expectancy is 49,930 hours. The brackets retain the stock mounting points.
The wire adapters plug directly into the OEM connectors. This keeps the factory fog switch in use, and no splicing or soldering is needed.
Key features
- Replacement fog pocket kit that keeps factory fit and finish
- Plug and play wire adapters for the OEM connectors
- Retains use of the factory fog switch
- Brackets designed to retain the stock mounting points
- 4,900 lumens per light from 4 LEDs
- Hard anodized and powder coated cast aluminum housing
- LED life expectancy of 49,930 hours
Wiring and fog light care
Fog lights are auxiliary lighting, and most of the work in a fog pocket upgrade happens at the wiring. Before installing, locate the factory fog switch circuit and make sure the connectors are intact, since corroded pins cause dim or flickering output. Many owners keep the original fog switch in use so the lights behave as they did from the factory.
Pocket lights are also exposed to road grime and water splash. Periodically clean the lenses and inspect the housing seals, and re-check the mounting hardware after the first few rough drives. Signs that a light needs attention include uneven brightness between the pair, condensation inside the lens, or a switch that cuts out under load. Keep spare connectors and a small amount of dielectric grease on hand for future service.
- Inspect connector pins before installation
- Clean lenses with a soft cloth and mild soap
- Re-check mounting hardware after rough trail use
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 447071 |
| UPC | 819314026985 |
| Light type | LED |
| LEDs per light | 4 |
| Lumens per light | 4,900 |
| Combined output | 9,800 lumens |
| Power | 40W |
| Current | 2.90A |
| Dimensions | 3.07 x 2.77 x 3.07 in |
| Housing | Hard anodized, powder coated cast aluminum |
| LED life expectancy | 49,930 hours |
| Fitment | Direct fit for the 2018 Jeep Wrangler (JL). |
Vehicle fitment
The kit fits the 2018 Jeep Wrangler (JL) in Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims. It is only compatible with the plastic Sahara bumper, so match your bumper before ordering.
Earlier Wrangler JK models are not covered by this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Plug the wire adapters into the factory connectors and keep the factory fog switch wiring in use. The kit is plug and play, but each light draws 40W, so keep the connectors clean and dry and check local road-use rules for auxiliary lights.
What’s included
- A pair of Squadron-R Pro LED lights
- Two sets of Jeep JL mounting brackets
- Plug and play wiring connectors
- Mounting hardware












