Overview
The Baer Brakes 4262681C is an 11 inch SS4 Plus Dual Deep Stage rear disc brake kit for Ford 9 inch rear axles with Torino or late big bearing housing ends. It is built for drag racing and heavy, fast cars that may also see street use.
The kit uses four 4-piston S4 calipers paired with 2-piece slotted, drilled, zinc-plated rotors on billet aluminum hats. It fits most 15 inch and larger wheels. It requires a 5.75 inch axle flange and does not include a park brake.
Key features
- Four 4-piston S4 calipers with hard anodized aluminum pistons and stainless steel abutments
- Noise suppression clips and a powder coated clear caliper finish
- 2-piece slotted, drilled, zinc-plated rotors with iron rotor faces and billet aluminum hats
- Hats drilled for 5/8 inch wheel studs
- Pre-assembled rotors with NAS high grade stainless hardware and mounting hardware included
- Dust and weather seals and DR1 or HB100 pad type
- Designed for 15 inch and larger wheels in a smaller package than Baer’s larger brake systems
Drag setup considerations
Drag brake systems work hardest when the setup is matched to the car’s weight and intended use. Four-piston calipers generate more clamping force per wheel, which can lock a rear wheel sooner on a wet surface if the front bias is wrong. Balance adjustments and line routing are part of choosing the right setup.
A kit without a park brake leaves the parking function to a separate system. Many builders use a transmission-mounted or aftermarket parking brake, and that hardware needs to clear the new rotors and calipers. Check clearance before final assembly.
Once in service, re-torque wheel fasteners after the first few drives, inspect rotor faces for heat checking, and keep hose ends tight. Replace pads when they approach the minimum thickness, and bleed the system after any hose or caliper work.
- Confirm the axle flange before buying
- Plan hose fittings for the S4 calipers
- Choose a parking method separately
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262681C |
| UPC | 844165038894 |
| Sold as | Set |
| Axle | Rear |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Axle flange requirement | 5.75 inch |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 15.0 inch |
| Wheel stud holes | 5/8 inch |
| Caliper | S4, fixed, 4 pistons, clear |
| Piston size | 1.375 inch |
| Rotor type | 2-piece, slotted and drilled, vented |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor material | Iron with aluminum hat |
| Pad type | DR1 or HB100 (FMSI DR1) |
| Friction material | Semi-metallic |
| Grade | Performance |
| Finish | Powder coated calipers; zinc-plated rotors |
| Country of origin | US |
Vehicle fitment
It is a rear brake kit for Ford 9 inch axles with Torino or late big bearing housing ends, an axle type rather than a vehicle model. Check the axle housing and flange before ordering.
Installation notes
The axle flange must measure 5.75 inch, so confirm this before fitting the kit. The rotors arrive pre-assembled with stainless hardware, and mounting hardware is included. Brake hoses are not included, so plan hose fittings that match the S4 calipers. The kit has no park brake, so any parking brake hardware must be sourced separately. Drag race brake systems should be installed by someone experienced with four-piston calipers.
What’s included
The kit includes four S4 calipers (two sets), pre-assembled 2-piece rotors, billet aluminum hats, NAS high grade stainless hardware and mounting hardware.
Not included: park brake, front rotors, lug nuts and brake hoses.















