Overview
The Baer Brakes Extreme Plus 14 inch rear brake system in silver, part number 4262097S, is a rear disc brake kit for Ford 9 inch rear axles with Torino (late big) bearing housing ends. It is drilled for a 5×4.50/5×4.75 bolt pattern and uses a six-piston monoblock caliper, labeled 6S, with a 14-inch two-piece slotted, drilled and zinc-plated rotor.
The backing plate serves as the caliper mount and holds a one-piece park brake shoe assembly, so the parking brake is part of the kit. Rotors come pre-assembled with NAS high grade stainless hardware. The kit uses D1247 pads and template N085P, and the 14 inch Extreme Plus is intended for wheels of 18 inches or larger.
Key features
- One-piece monoblock six-piston 6S caliper
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- CNC machined from US sourced 2618 aluminum forging
- Two-piece slotted, drilled and zinc-plated rotor with billet aluminum hat
- Powder coated silver finish
- Park brake shoe assembly housed in the backing plate
Hub pattern and wheel matching
The bolt pattern is the first fit check for any wheel, and a pattern that is close but not exact will not seat the wheel safely. Hub pattern is only part of the picture, though. Center bore, offset and wheel style all affect whether the rotor and caliper clear the spokes or barrel. Compare the wheel back with the rotor and caliper position before assembly, and keep the lug seats clean and dry.
Wheel spacers and adapters change the offset and the load path, so they add stress that the original hub was not designed to carry. If a spacer is considered, check its thickness against caliper clearance and the bearing load rating before fitting. Recheck lug torque after the first few drives, as the wheel and hub settle against each other.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262097S |
| UPC | 844165036012 |
| Sold as | Kit |
| Caliper | One-piece monoblock, six-piston (6S), fixed |
| Caliper color | Silver |
| Rotor outside diameter | 14.0 inch |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.25 |
| Pad type | FMSI D1247 |
| Template | N085P |
| Lug count | 5 |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 18.0 inch |
| Axle flange | Ford 9 inch Torino/late big bearing |
| Hose material | Stainless steel |
| Park brake | Included; park brake cables not included |
| Front rotor included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
The kit is matched to Ford 9 inch rear axles with Torino (late big) bearing housing ends and a 5×4.50/5×4.75 hub pattern. Measure your axle flange type and bolt pattern before ordering.
This kit is not built for a 5×5.00 wheel or a small bearing Ford housing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit does not include front rotors, lug nuts or park brake cables, so those need separate sourcing. Verify the bolt pattern on the vehicle before assembly and support the axle securely on stands while the rear brakes are serviced.
What’s included
What arrives in the kit: the caliper, the backing plate with its park brake shoe assembly, 14.0 inch rotors with stainless hardware, and the braided hoses.
Left out of the box: lug nuts, front rotors, and park brake cables.















