Overview
The Baer Brakes 4262668C is a single-set SS4 Plus Deep Stage rear brake kit with clear powder coated calipers, intended for Ford 8.8 inch rear ends that have C-clip eliminators.
Two S4 calipers work with 11 inch two-piece rotors, and Baer markets the system as a drag race option for heavy, fast cars that may see street use. The minimum wheel diameter is 15.0 inch.
Key features
- Two-piece S4 caliper pair with 1.75 inch pistons, made in Phoenix, Az
- Clear powder coat calipers
- Hard anodized aluminum pistons, noise suppression clips and stainless abutments
- Slotted, drilled and zinc-plated two-piece 11 inch rotor
- Billet aluminum hats drilled for 5/8 inch wheel studs
- Dust and weather seals
- DR1 or HB100 pad type
- NAS high grade stainless hardware with pre-assembled rotors
Pad break-in and pedal feel
Pads need a proper bedding procedure before they reach full stopping power. Bedding deposits an even layer of friction material on the rotor, which keeps braking smooth and reduces noise. Follow general bedding practice for the first few stops, since drag pads are often used on run days rather than daily driving.
Pedal feel changes as pads and rotors seat in, so a firm pedal after a rebuild is normal. Re-check the pedal and look at the rotor surface after the first sessions, since uneven wear or blue discoloration suggests the pads need a closer look.
- Make controlled stops rather than hard ones at first
- Let the rotors cool between sessions
- Avoid holding the brake at a stop after hard runs
- Replace pads and rotors together when wear is uneven
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262668C |
| UPC | 844165049111 |
| Sold as | Kit |
| Caliper | S4, four-piston per caliper, fixed, two-piece, clear |
| Caliper quantity | 2 |
| Piston size | 1.75 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor type | Two-piece, vented, slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 |
| Pad type | DR1 or HB100 (FMSI DR1) |
| Friction material | Semi-metallic |
| Grade | Performance |
| Axle flange | Ford 8.8 inch, C-clip eliminator |
| Axle flange requirement | 5.75 inch |
| Axle standoff | 2.5 inch |
| Wheel bolt pattern | 5 lug, 5×4.50/5×4.75 |
| Minimum wheel diameter | 15.0 inch |
| Park brake | No |
| Brake hoses included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
Ford 8.8 inch rear axles that use C-clip eliminators fit this kit, with a 5×4.50/5×4.75 bolt pattern and a 5.75 inch axle flange.
Rear ends that still use a standard C-clip are outside this application. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is designed for eliminator-equipped axles and will not work with standard C-clip axles. Mounting hardware is included with the assembled rotors, and brake hoses must be sourced separately because they are not part of the kit.
What’s included
Two S4 calipers, pre-assembled two-piece rotors with stainless hardware, and the mounting hardware.
Not included: a front rotor, lug nuts, a park brake and brake hoses.















