Overview
The Baer Brakes Claw Rotor and Pad Combo Kit, part number 55097-1363, is a front brake kit for 2007–2020 Chevrolet, GMC and Cadillac applications. It includes a pair of conventional vented front rotors that are slot, drilled and zinc-plated, along with ceramic street pads.
Baer offers it as a direct replacement with no modifications required. It suits drivers who want improved braking performance and a sharper look for street use, and the vehicles covered are shown in the fitment section below.
Key features
- Slot, drilled and zinc-plated front rotors
- Conventional rotor design with vented construction
- Ceramic friction material pads
- Stainless-steel abutment clips and noise suppression hardware
- Floating rotor design
- Rust resistant coating
Signs front brakes need service
Front brakes do most of the stopping on a light truck or SUV, so front pad and rotor wear tends to show first. Common signs include a squeal from worn wear indicators, a pulsing pedal, pulling to one side under braking and grinding once the pad material is gone. Any of these should be checked before the next long drive.
Vented rotors dissipate heat better than solid rotors, which helps when towing or descending grades, but the vanes still need inspection for cracks. When replacing front pads, check the caliper, brake hose and fluid condition. Consider servicing the rear pads at the same visit so the vehicle brakes evenly across both axles.
- Pulsation or vibration through the steering wheel
- Pulling to one side during braking
- Squealing from wear indicators
- Cracks or heavy scoring on the rotor face
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 55097-1363 |
| UPC | 844165053255 |
| Axle | Front |
| Construction | One piece, full cast |
| Rotor type | Conventional |
| Solid or vented | Vented |
| Vent type | Straight |
| Surface type | Slotted x drilled |
| Material | Cast iron |
| Disc finish | Zinc plated |
| Floating | Yes |
| Grade | Premium |
| Friction material | Ceramic |
| Rust resistant coating | Yes |
| Center hole diameter | 3.091 in (78.5 mm) |
| Outside diameter | 330 |
| Overall height | 2.165 in (55 mm) |
| Nominal thickness | 1.181 in (30 mm) |
| Discard thickness | 28 |
| Mounting bolt hole circle | 139.7 mm (5.5 in) |
| Mounting bolt hole diameter | 15.9 |
| Abutment clips included | Yes |
| ABS tone ring included | No |
| Brake lubricant included | No |
| Emission code | 6 |
Vehicle fitment
This front kit fits 2009–2020 Cadillac Escalade, 2008–2020 Cadillac Escalade ESV, 2008–2013 Cadillac Escalade EXT, 2008–2013 Chevrolet Avalanche, 2009–2014 Chevrolet Express 1500, 2005–2019 Chevrolet Silverado 1500 (LS, LT, LTZ, SS, WT), 2007 Chevrolet Silverado 1500 Classic (SS), 2015–2020 Chevrolet Suburban, 2008–2014 Chevrolet Suburban 1500, 2008–2020 Chevrolet Tahoe, 2009–2014 GMC Savana 1500, 2007–2019 GMC Sierra 1500, 2008–2020 GMC Yukon, 2015–2020 GMC Yukon XL and 2008–2014 GMC Yukon XL 1500.
Rear-axle kits and heavy-duty models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a front kit with conventional rotors, not the drum-in-hat rear design. Ceramic pads and abutment clips are included, while brake lubricant and the ABS tone ring are not. Because the kit replaces front braking components, have a licensed mechanic install it and test the brakes before regular driving.
What’s included
Each kit includes a pair of direct replacement front rotors, a set of Baer Claw ceramic performance street pads and stainless-steel abutment and noise suppression hardware.
Not included: brake lubricant and the ABS tone ring.
